Telewave Inc ANT150F6-3DIN
150-157 MHz Omni-Directional Fiberglass Collinear Antenna, 6 dBd, 500W, 7/16 DIN Connector
Includes a dual clamp set for mounting the antenna to a support mast
Telewave-ANT150F6-series-antennas.pdf (155.07 KB) Telewave-antenna-connection-weatherproofing.pdf (177.98 KB)| ANT150F6-3 | 150-157 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-3DIN | 150-157 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-3I | 150-157 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-C | 151.5-157.5 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-SF | 153-161 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-G | 154-162 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-A | 155-163 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-4 | 156-164 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-4DIN | 156-164 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-4I | 156-164 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-5 | 158-166 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-5DIN | 158-166 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-6 | 158-166 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-6DIN | 158-166 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-E | 165-172 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-D | 166-173 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-7 | 167-172.5 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-7DIN | 167-172.5 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-7I | 167-172.5 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-8 | 171-175 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-L | 173.1 MHz, N-F, clamps bottom (Normal mount) |
| Peak Gain: | 4.0 dBd / 6.1 dBi |
| Power rating (Type.): | 500 watts |
| Impedance: | 50 Ohms |
| Polarization: | Vertical |
| Input VSWR: | 1.5:1 or less |
| Vertical beamwidth: | 20° |
| Temperature range: | -58 to +140 °F -50 to +60 °C |
| Wind rating / with 0.5” ice: | 225 / 150 MPH |
| Maximum exposed area: | 2.97 ft.² |
| Dimensions (L x D): | 149 x 2.5 in. 378.5 x 6.4 cm |
| Weight w/o Clamp: | 45 lb / 20.4 kg |
Telewave Inc. designs and manufactures high quality RF system products. It serves wireless system operators, public safety providers, local and state governments, and federal agencies in the United States and internationally. The company was founded in 1972 and is based in San Jose, California. Telewave strives to be the premier supplier of seamless interoperable communication systems that provide security and reliability in mission critical eco-systems for both commercial and military applications worldwide. Telewave products are used by more than 7,500 equipment and network manufacturers and government agencies throughout the world.
| ANT150F6-3DIN | 150-157 MHz Omni-Directional Fiberglass Collinear Antenna, 6 dBd, 500W, 7/16 DIN Connector |
| PM-2A-450-BNCM | DUAL RF POWER MONITOR W/BNC MTNG PLT |
| F3400DS 51 USA | IDAS VHF Digital Handheld Transceiver, 136-174 MHz, 5W, 1024 Channels, IP68, Built-in Bluetooth and GPS Receiver, Digital Voice Recording, microSD Card Slot, with LCD and Simple Keypad |
| BP-284 | 7.4V @ 3350mAh Li-Ion Battery Pack |
| EIA158V158N | 1 5/8" EIA Flange Connector for 1 5/8" Cable, O-Ring Type, 1 ea |
| KAA0204-E-CBL | Replacement Microphone Cable, SM BKNXPLXX-E |
| W66442/SNCI-1 | Notch Pass Duplexer / Iso-Plexer, 806 - 894 MHz, 50 W, 2PN, Single |
| MMBB | Battery Back-Up Module, 0-60 VDC @ 75 Amps Input, without Battery Charging |
| 24341 | Transmitter Combiner, 134 - 225 MHz, 20 W |
| F4021S 42 RC 220V | ICOM IC-F4021S UHF Portable Radio, 450 - 512 MHz, 4W, 128 Channels, 12.5/25 kHz Channel Spacing, without Keypad |
Facebook
YoutubeCopyright © 1991-2026 American Communication Systems, Inc. Patent and other rights reserved. |
