Telewave Inc ANT150F6-7I
167-172.5 MHz Omni-Directional Fiberglass Collinear Antenna, 6 dBd, 500W, N-Female Connector, Inverted Installation, Clamps Top
Includes a dual clamp set for mounting the antenna to a support mast
Not UPS shippable
Telewave-ANT150F6-series-antennas.pdf (155.07 KB) Telewave-antenna-connection-weatherproofing.pdf (177.98 KB)| ANT150F6-3 | 150-157 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-3DIN | 150-157 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-3I | 150-157 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-C | 151.5-157.5 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-SF | 153-161 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-G | 154-162 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-A | 155-163 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-4 | 156-164 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-4DIN | 156-164 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-4I | 156-164 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-5 | 158-166 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-5DIN | 158-166 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-6 | 158-166 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-6DIN | 158-166 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-E | 165-172 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-D | 166-173 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-7 | 167-172.5 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-7DIN | 167-172.5 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-7I | 167-172.5 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-8 | 171-175 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-L | 173.1 MHz, N-F, clamps bottom (Normal mount) |
| Peak Gain: | 4.0 dBd / 6.1 dBi |
| Power rating (Type.): | 500 watts |
| Impedance: | 50 Ohms |
| Polarization: | Vertical |
| Input VSWR: | 1.5:1 or less |
| Vertical beamwidth: | 20° |
| Temperature range: | -58 to +140 °F -50 to +60 °C |
| Wind rating / with 0.5” ice: | 225 / 150 MPH |
| Maximum exposed area: | 2.97 ft.² |
| Dimensions (L x D): | 149 x 2.5 in. 378.5 x 6.4 cm |
| Weight w/o Clamp: | 45 lb / 20.4 kg |
Telewave Inc. designs and manufactures high quality RF system products. It serves wireless system operators, public safety providers, local and state governments, and federal agencies in the United States and internationally. The company was founded in 1972 and is based in San Jose, California. Telewave strives to be the premier supplier of seamless interoperable communication systems that provide security and reliability in mission critical eco-systems for both commercial and military applications worldwide. Telewave products are used by more than 7,500 equipment and network manufacturers and government agencies throughout the world.
| ANT150F6-7I | 167-172.5 MHz Omni-Directional Fiberglass Collinear Antenna, 6 dBd, 500W, N-Female Connector, Inverted Installation, Clamps Top |
| EVC-MT19-4 | 14V - 24V DC In-Vehicle Rugged Four Unit Charger |
| Telex HS-976 | Single-sided version of the HS-975 |
| F10212 | Connector Kit 25-pin |
| 07-111-4010 | Cadex charger battery adapter. To be used with batteries made for Panasonic Digitlal Camcorders Broadcast Equipment. |
| TS900PB2 | 806-960 MHz Intermodulation Suppression Panel, 2 Isolators with Low-Pass Filter, 300W, N-Female Connector |
| SPM-113QD | OBSERVER Light Duty Remote Speaker Microphone, 3.5mm Earphone Jack, with Quick Disconnect Radio Adapter |
| KSGDX13546 | 6 Cavity UHF BpBr Duplexer (450-470 MHz only), 250W Continuous Duty |
| RMBC-ACF-12 | Battery Back Up Module, 0-15 VDC Input |
| 31975B-350 | Nylon Carry Case with Swivel |
Facebook
YoutubeCopyright © 1991-2025 American Communication Systems, Inc. Patent and other rights reserved. |
