Telewave Inc ANT150F6-7DIN
167-172.5 MHz Omni-Directional Fiberglass Collinear Antenna, 6 dBd, 500W, 7/16 DIN Connector
Includes a dual clamp set for mounting the antenna to a support mast
Not UPS shippable
Telewave-ANT150F6-series-antennas.pdf (155.07 KB) Telewave-antenna-connection-weatherproofing.pdf (177.98 KB)| ANT150F6-3 | 150-157 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-3DIN | 150-157 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-3I | 150-157 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-C | 151.5-157.5 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-SF | 153-161 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-G | 154-162 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-A | 155-163 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-4 | 156-164 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-4DIN | 156-164 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-4I | 156-164 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-5 | 158-166 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-5DIN | 158-166 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-6 | 158-166 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-6DIN | 158-166 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-E | 165-172 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-D | 166-173 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-7 | 167-172.5 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-7DIN | 167-172.5 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-7I | 167-172.5 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-8 | 171-175 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-L | 173.1 MHz, N-F, clamps bottom (Normal mount) |
| Peak Gain: | 4.0 dBd / 6.1 dBi |
| Power rating (Type.): | 500 watts |
| Impedance: | 50 Ohms |
| Polarization: | Vertical |
| Input VSWR: | 1.5:1 or less |
| Vertical beamwidth: | 20° |
| Temperature range: | -58 to +140 °F -50 to +60 °C |
| Wind rating / with 0.5” ice: | 225 / 150 MPH |
| Maximum exposed area: | 2.97 ft.² |
| Dimensions (L x D): | 149 x 2.5 in. 378.5 x 6.4 cm |
| Weight w/o Clamp: | 45 lb / 20.4 kg |
Telewave Inc. designs and manufactures high quality RF system products. It serves wireless system operators, public safety providers, local and state governments, and federal agencies in the United States and internationally. The company was founded in 1972 and is based in San Jose, California. Telewave strives to be the premier supplier of seamless interoperable communication systems that provide security and reliability in mission critical eco-systems for both commercial and military applications worldwide. Telewave products are used by more than 7,500 equipment and network manufacturers and government agencies throughout the world.
| ANT150F6-7DIN | 167-172.5 MHz Omni-Directional Fiberglass Collinear Antenna, 6 dBd, 500W, 7/16 DIN Connector |
| Bee-2826B-C | Bee Electronics 2826B-C Nylon DTMF carry case, with Clip. For Uniden Bearcat BC250D, BC296D radio(s) |
| 2327B | Nylon Carry Case with Belt Loop |
| TLF-450 | 406-512 MHz Low Pass Filter, 200W, N-Female Connector to N-Male Connector |
| M108-220-3TP | 3 CH TRANSMITTER COMBINER |
| F4TR 11 WWBP196 DTC | IC-F4TR UHF Trunked radio, no keypad, 450-490 MHz, 4W, 12.5/25 kHz, 250 conv. ch, 50 systems / 20 ch, with 110V Drop-In Trickle Charger (BC-133 & BC-122A). Includes antenna, 1650 Ni-MH battery (WWBP196M), plastic belt clip, manual |
| KMC-36 | Standard Electret Mobile Microphone with 12-key DTMF, MIL-SPEC, 8-pin Connector |
| ACC-516E | Extender Board |
| HLP-SNL-33 | Lightweight Padded Headset with Single Speaker, Leatherette Ear Pad and Flexible Boom Electret Microphone |
| 07-110-8570 | Cadex charger battery adapter. To be used with batteries made for Telex BTR 500 radio. |
Facebook
YoutubeCopyright © 1991-2025 American Communication Systems, Inc. Patent and other rights reserved. |
