Telewave Inc ANT150F6-SF
153-161 MHz Omni-Directional Collinear Split Frequencies Fiberglass Antenna, 6 dBd, 500W, N-Female Connector
Includes a dual clamp set for mounting the antenna to a support mast
Not UPS shippable
Telewave-ANT150F6-series-antennas.pdf (155.07 KB) Telewave-antenna-connection-weatherproofing.pdf (177.98 KB)| ANT150F6-3 | 150-157 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-3DIN | 150-157 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-3I | 150-157 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-C | 151.5-157.5 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-SF | 153-161 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-G | 154-162 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-A | 155-163 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-4 | 156-164 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-4DIN | 156-164 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-4I | 156-164 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-5 | 158-166 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-5DIN | 158-166 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-6 | 158-166 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-6DIN | 158-166 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-E | 165-172 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-D | 166-173 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-7 | 167-172.5 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-7DIN | 167-172.5 MHz, 7/16 DIN-F, clamps bottom (Normal mount) |
| ANT150F6-7I | 167-172.5 MHz, N-F, clamps top (Inverted mount) |
| ANT150F6-8 | 171-175 MHz, N-F, clamps bottom (Normal mount) |
| ANT150F6-L | 173.1 MHz, N-F, clamps bottom (Normal mount) |
| Peak Gain: | 4.0 dBd / 6.1 dBi |
| Power rating (Type.): | 500 watts |
| Impedance: | 50 Ohms |
| Polarization: | Vertical |
| Input VSWR: | 1.5:1 or less |
| Vertical beamwidth: | 20° |
| Temperature range: | -58 to +140 °F -50 to +60 °C |
| Wind rating / with 0.5” ice: | 225 / 150 MPH |
| Maximum exposed area: | 2.97 ft.² |
| Dimensions (L x D): | 149 x 2.5 in. 378.5 x 6.4 cm |
| Weight w/o Clamp: | 45 lb / 20.4 kg |
Telewave Inc. designs and manufactures high quality RF system products. It serves wireless system operators, public safety providers, local and state governments, and federal agencies in the United States and internationally. The company was founded in 1972 and is based in San Jose, California. Telewave strives to be the premier supplier of seamless interoperable communication systems that provide security and reliability in mission critical eco-systems for both commercial and military applications worldwide. Telewave products are used by more than 7,500 equipment and network manufacturers and government agencies throughout the world.
| ANT150F6-SF | 153-161 MHz Omni-Directional Collinear Split Frequencies Fiberglass Antenna, 6 dBd, 500W, N-Female Connector |
| TVS-2V-HS1 | Frequency Hopping / Rolling Code TVS-2 Scrambler H-250 Handset for Military Manpack Radios |
| SPM-2220T | TROOPER II Water-Proof Noise Cancelling Remote Speaker Microphone with Large PTT and Earphone Jack, with Tactical Kit |
| ANT900D | 800-1000 MHz Non-Directional Aluminum Single Dipole Antenna, 2.5 dBd, 500W, N-Male Connector |
| V2-R2MR5112 | REVO NC2 Noise Canceling Speaker Microphone with Large PTT, Clothing Clip and 3.5mm Earphone Jack |
| KRA-15K3 | UHF PORTABLE HANDHELD RADIO ANTENNA |
| TS-130-SM1GP | Speaker Microphone (Encode & Decode) with GPS / GLONASS |
| L-868 | TNT-ESN Up-grade for 80-series mobile/portable |
| V4-HS2MG2 | Hurricane III Professional Lightweight Headset with Dual Speaker, Noise Canceling Microphone, SureFire Patented EarLock Retention Rings and Noise-Reducing Filters, No PTT |
| MB-56 | Belt Clip |
Facebook
YoutubeCopyright © 1991-2025 American Communication Systems, Inc. Patent and other rights reserved. |
