American Communication Systems
Home  >>  Eupen 7/16M50BL12X
My Cart Cart    
My Account My Account


Eupen 7/16M50BL12X

7/16 DIN Male Right Angle Connector for 1/2" Hi-Flex Cable, O-Ring Type, 1 ea
The connector is designed according the standard interface as 7/16 DIN. Contact components are silver or trimetal plated to minimize insertion loss and passive intermodulation products
Customer Rating:  
/
Vote!
Item SKU Number:  466044
Made in:  Belgium 
FCA point / Shipped from:  USA 
 Download Free Materials:
  
Adobe Acrobat Reader Eupen-12-Hi-Flex-connectors-for-RF-cables-data-sheet.pdf (1041.75 KB)
  
Adobe Acrobat Reader Eupen-cable-connectors-installation-manual.pdf (2567.91 KB)
 Item Details:


Eupen 1/2 inch Hi-Flex Coaxial Cable Connectors

The connectors are designed with the standard interfaces such as N, 4.3-10, or DIN 7-16. The contact components are coated with silver or trimetal to reduce the loss of signal and unwanted interference. The mechanical parts are covered with a layer of nickel to ensure durability and protection against corrosion. Watertightness is achieved simultaneously on the outer conductor and on the jacket by using a special silicone gasket. This watertight solution allows the use of ours connectors in the toughest environmental conditions. For a convenient and dependable installation that is also cost-effective, special trimming tools are highly recommended.

Available as:

4.3-10M50B12X 4.3-10 male, hiflex, 1/2" connector
7/16F50B12X 7/16 DIN female, hiflex, 1/2" connector
7/16M50B12X 7/16 DIN male, hiflex, 1/2" connector
7/16M50BL12X 7/16 DIN male, hiflex, right angle, 1/2" connector
NF50B12X N female, hiflex, 1/2" connector
NM50B12X N male, hiflex, 1/2" connector
NM50BL12X N male, hiflex, right angle, 1/2" connector

Features:

- Low reflection coefficient (up to 3.0 GHz)
- Low PIM level
- High contact force through inner contacts made in a high-strength copper alloy
- Provides watertight seal, ensuring protection against moisture and dust (IP67/IP68)
- Resistant to corrosion, maintaining long-lasting functionality
- Quick trimming tool for cable preparation
- Installation ”screw it on and tighten it”

Electrical characteristics:

Nominal impedance, Ohm: 50
Reflection coefficient @ 3 GHz, db: ≥34
Working voltage: 1 - 2.7 kV rms, 50 Hz (see pdf spec sheet)
Max peak power: 10 - 40 kW (see pdf spec sheet)
Temperature range: -40°F to +185°F (-40°C to +85°C)
External parts materials Brass with passivated silver or trimetal or electroless nickel plating
Outer contact: Brass with passivated silver or trimetal plating
Inner contact: Passivated silver plated high-strength copper alloy and brass
Dielectric: TXP / PTFE
O-Rings: High quality silicone
Special trimming tool: SPTC50B12X


 Similar or Related Products:

 These models may be compatible with your equipment:

7/16F50B12X
7/16F50B12X
Eupen


7/16 DIN-Female Connector for 1/2" Hi-Flex Cable, O-Ring Type, 1 ea
NM50BL12X
NM50BL12X
Eupen


N Male Right Angle Connector for 1/2" Hi-Flex Cable, O-Ring Style, 1ea
NF50B12X
NF50B12X
Eupen


N Female Connector for 1/2" Hi-Flex Cable, O-Ring Type, 1 ea
EC4-50-HF-HLFRB
EC4-50-HF-HLFRB
Eupen


1/2" Hi-Flex Halogen Free Fire Retardant Foam Coax Cable
NM50B12X
NM50B12X
Eupen


N Male Connector for 1/2" Hi-Flex Cable, O-Ring Style, 1 ea
EC4-50-HF
EC4-50-HF
Eupen


1/2" Hi-Flex Foam Coax Cable





 Last Viewed Items:

7/16M50BL12X 7/16 DIN Male Right Angle Connector for 1/2" Hi-Flex Cable, O-Ring Type, 1 ea
07-111-0190 Cadex charger battery adapter. To be used with model A20KAL/KZP Li 3.6V 750 mah battery, made for Philips Fisio 82x
07-111-3280 Cadex charger battery adapter. To be used with batteries made for Samsung SGH-C416, SGH-C417, SGH-A737 Cellular Telephone(s).
07-111-1410 Cadex charger battery adapter. To be used with batteries made for Zebra QL, RW & P4T SERIES Miscellaneous Equipment.
07-111-1700 Cadex Charger Battery Adapter
2160B-C Leather Carry Case with Clip



Share this Page