American Communication Systems
Home  >>  Eupen NM50B12X
My Cart Cart    
My Account My Account


Eupen NM50B12X

N Male Connector for 1/2" Hi-Flex Cable, O-Ring Style, 1 ea
The connector is designed according the standard interface as N. Contact components are silver or trimetal plated to minimize insertion loss and passive intermodulation products
Customer Rating:  
/
Vote!
Item SKU Number:  466043
Made in:  Belgium 
FCA point / Shipped from:  USA 
 Download Free Materials:
  
Adobe Acrobat Reader Eupen-12-Hi-Flex-connectors-for-RF-cables-data-sheet.pdf (1041.75 KB)
  
Adobe Acrobat Reader Eupen-cable-connectors-installation-manual.pdf (2567.91 KB)
 Item Details:


Eupen 1/2 inch Hi-Flex Coaxial Cable Connectors

The connectors are designed with the standard interfaces such as N, 4.3-10, or DIN 7-16. The contact components are coated with silver or trimetal to reduce the loss of signal and unwanted interference. The mechanical parts are covered with a layer of nickel to ensure durability and protection against corrosion. Watertightness is achieved simultaneously on the outer conductor and on the jacket by using a special silicone gasket. This watertight solution allows the use of ours connectors in the toughest environmental conditions. For a convenient and dependable installation that is also cost-effective, special trimming tools are highly recommended.

Available as:

4.3-10M50B12X 4.3-10 male, hiflex, 1/2" connector
7/16F50B12X 7/16 DIN female, hiflex, 1/2" connector
7/16M50B12X 7/16 DIN male, hiflex, 1/2" connector
7/16M50BL12X 7/16 DIN male, hiflex, right angle, 1/2" connector
NF50B12X N female, hiflex, 1/2" connector
NM50B12X N male, hiflex, 1/2" connector
NM50BL12X N male, hiflex, right angle, 1/2" connector

Features:

- Low reflection coefficient (up to 3.0 GHz)
- Low PIM level
- High contact force through inner contacts made in a high-strength copper alloy
- Provides watertight seal, ensuring protection against moisture and dust (IP67/IP68)
- Resistant to corrosion, maintaining long-lasting functionality
- Quick trimming tool for cable preparation
- Installation ”screw it on and tighten it”

Electrical characteristics:

Nominal impedance, Ohm: 50
Reflection coefficient @ 3 GHz, db: ≥34
Working voltage: 1 - 2.7 kV rms, 50 Hz (see pdf spec sheet)
Max peak power: 10 - 40 kW (see pdf spec sheet)
Temperature range: -40°F to +185°F (-40°C to +85°C)
External parts materials Brass with passivated silver or trimetal or electroless nickel plating
Outer contact: Brass with passivated silver or trimetal plating
Inner contact: Passivated silver plated high-strength copper alloy and brass
Dielectric: TXP / PTFE
O-Rings: High quality silicone
Special trimming tool: SPTC50B12X


 Similar or Related Products:

 These models may be compatible with your equipment:

7/16F50B12X
7/16F50B12X
Eupen


7/16 DIN-Female Connector for 1/2" Hi-Flex Cable, O-Ring Type, 1 ea
7/16M50BL12X
7/16M50BL12X
Eupen


7/16 DIN Male Right Angle Connector for 1/2" Hi-Flex Cable, O-Ring Type, 1 ea
4.3-10M50B12X
4.3-10M50B12X
Eupen


4.3-10 Male Right Angle Connector for 1/2" Hi-Flex Cable, O-Ring Type, 1 ea
7/16M50B12X
7/16M50B12X
Eupen


7/16 DIN Male Connector for 1/2" Hi-Flex Cable, O-Ring Type, 1 ea
NM50BL12X
NM50BL12X
Eupen


N Male Right Angle Connector for 1/2" Hi-Flex Cable, O-Ring Style, 1ea
EC4-50-HF
EC4-50-HF
Eupen


1/2" Hi-Flex Foam Coax Cable





 Last Viewed Items:

NM50B12X N Male Connector for 1/2" Hi-Flex Cable, O-Ring Style, 1 ea
07-111-3390 Cadex Charger Battery Adapter
07-110-3520 Cadex charger battery adapter. To be used with batteries made for Military 390, 490, 590, 690 radios.
07-110-1203 Cadex charger battery adapter. To be used with batteries made for Motorola Comm MX1000, Saber radios.
07-110-7610 Cadex charger battery adapter. To be used with battery model NP2.3-12 SLA 12V 2300 mah battery, made for Yuasa EMERGENCY BACKUP
07-111-2270 Cadex Charger Battery Adapter
TK-290K2 KENWOOD TK-290 VHF Portable Radio, 136-174 MHz, 5W, 160 Channels, with Dual Priority Scan and DTMF Keypad
07-111-4620 Cadex charger battery adapter. To be used with batteries made for Datalogic Skorpio Data Collection Equipment.
07-111-6010 Cadex Charger Battery Adapter
KMB-16 Six Unit Charger Adapter



Share this Page