Item Details:
Eupen 1/4 inch Hi-Flex Coaxial Cable Connectors
The connectors are designed with the standard interfaces such as N, Nex10, 4.3-10, or DIN 7-16. The contact components are coated with silver or trimetal to reduce the loss of signal and unwanted interference. The mechanical parts are covered with a layer of nickel to ensure durability and protection against corrosion. Watertightness is achieved simultaneously on the outer conductor and on the jacket by using a special silicone gasket. This watertight solution allows the use of ours connectors in the toughest environmental conditions. For a convenient and dependable installation that is also cost-effective, special trimming tools are highly recommended.
Available as:
| 4.3-10M50B14X |
4.3-10 male, hiflex, 1/4" connector |
| 7/16M50B14X |
7/16 DIN male, hiflex, 1/4" connector |
| 7/16M50BL14X |
7/16 DIN male, right angle, hiflex, 1/4" connector |
| NEX10M50B14X |
NEX10 male, hiflex, 1/4" connector |
| NF50B14X |
N female, hiflex, 1/4" connector |
| NM50B14X |
N male, hiflex, 1/4" connector |
| NM50BL14X |
N male, hiflex, right angle, 1/4" connector |
Features:
- Low reflection coefficient (up to 3.0 GHz)
- Low PIM level
- High contact force through inner contacts made in a high-strength copper alloy
- Provides watertight seal, ensuring protection against moisture and dust (IP67/IP68)
- Resistant to corrosion, maintaining long-lasting functionality
- Quick trimming tool for cable preparation
- Installation ”screw it on and tighten it”
Electrical characteristics:
| Nominal impedance, Ohm: |
50 |
| Reflection coefficient @ 3 GHz, db: |
≥34 |
| Working voltage: |
1 - 2.7 kV rms, 50 Hz (see pdf spec sheet) |
| Max peak power: |
10 - 40 kW (see pdf spec sheet) |
| Temperature range: |
-40°F to +185°F (-40°C to +85°C) |
| External parts materials |
Brass with passivated silver or trimetal or electroless nickel plating |
| Outer contact: |
Brass with passivated silver or trimetal plating |
| Inner contact: |
Passivated silver plated high-strength copper alloy and brass |
| Dielectric: |
TXP / PTFE |
| O-Rings: |
High quality silicone |
| Special trimming tool: |
SPTC50B14X |
Eupen-14X-connectors-installation-instructions.pdf (3873.54 KB)
Facebook
Youtube
