American Communication Systems
Home  >>  Eupen NM50BL14X
My Cart Cart    
My Account My Account


Eupen NM50BL14X

N Male Right Angle Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea
The connector is designed according the standard interface as N. Contact components are silver or trimetal plated to minimize insertion loss and passive intermodulation products
Customer Rating:  
/
Vote!
Item SKU Number:  466733
Made in:  Belgium 
FCA point / Shipped from:  USA 
 Download Free Materials:
  
Adobe Acrobat Reader Eupen-14-Hi-Flex-connectors-for-RF-cables-data-sheet.pdf (205.39 KB)
  
Adobe Acrobat Reader Eupen-14X-connectors-installation-instructions.pdf (3873.54 KB)
 Item Details:


Eupen 1/4 inch Hi-Flex Coaxial Cable Connectors

The connectors are designed with the standard interfaces such as N, Nex10, 4.3-10, or DIN 7-16. The contact components are coated with silver or trimetal to reduce the loss of signal and unwanted interference. The mechanical parts are covered with a layer of nickel to ensure durability and protection against corrosion. Watertightness is achieved simultaneously on the outer conductor and on the jacket by using a special silicone gasket. This watertight solution allows the use of ours connectors in the toughest environmental conditions. For a convenient and dependable installation that is also cost-effective, special trimming tools are highly recommended.

Available as:

4.3-10M50B14X 4.3-10 male, hiflex, 1/4" connector
7/16M50B14X 7/16 DIN male, hiflex, 1/4" connector
7/16M50BL14X 7/16 DIN male, right angle, hiflex, 1/4" connector
NEX10M50B14X NEX10 male, hiflex, 1/4" connector
NF50B14X N female, hiflex, 1/4" connector
NM50B14X N male, hiflex, 1/4" connector
NM50BL14X N male, hiflex, right angle, 1/4" connector

Features:

- Low reflection coefficient (up to 3.0 GHz)
- Low PIM level
- High contact force through inner contacts made in a high-strength copper alloy
- Provides watertight seal, ensuring protection against moisture and dust (IP67/IP68)
- Resistant to corrosion, maintaining long-lasting functionality
- Quick trimming tool for cable preparation
- Installation ”screw it on and tighten it”

Electrical characteristics:

Nominal impedance, Ohm: 50
Reflection coefficient @ 3 GHz, db: ≥34
Working voltage: 1 - 2.7 kV rms, 50 Hz (see pdf spec sheet)
Max peak power: 10 - 40 kW (see pdf spec sheet)
Temperature range: -40°F to +185°F (-40°C to +85°C)
External parts materials Brass with passivated silver or trimetal or electroless nickel plating
Outer contact: Brass with passivated silver or trimetal plating
Inner contact: Passivated silver plated high-strength copper alloy and brass
Dielectric: TXP / PTFE
O-Rings: High quality silicone
Special trimming tool: SPTC50B14X


 Similar or Related Products:

 These models may be compatible with your equipment:

4.3-10M50B14X
4.3-10M50B14X
Eupen


4.3-10 Male Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea
NM50B14X
NM50B14X
Eupen


N Male Connector for 1/4" Hi-Flex Cable, O-Ring Style, 1 ea
NF50B14X
NF50B14X
Eupen


N Female Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea
NEX10M50B14X
NEX10M50B14X
Eupen


NEX10 Male Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea
7/16M50BL14X
7/16M50BL14X
Eupen


7/16 DIN Male Right Angle Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea
7/16M50B14X
7/16M50B14X
Eupen


7/16 DIN Male Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea





 Last Viewed Items:

NM50BL14X N Male Right Angle Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea
PMNN4578 3.7V @ 2500mAh Ultra High Li-Ion Battery Pack
VS-4LA VOX and PTT Unit with 2.5mm Female Connector
2997B-350 Nylon Carry Case with Swivel
8202B-150 Leather Carry Case with Swivel
07-110-1441 Cadex charger battery adapter. To be used with batteries made for Midland 70-155, 70-255 radios.
ANT220Y7-WRDIN 216-240 MHz Directional Aluminum 3-Element Yagi Antenna, 5 dBd, 500W, 7/16 DIN Connector
97714917 Service Manual, Hardcopy
87-725-0002 Watertight Carrying Case (Pelican 1500)
SP-39AD 4W @ 8 Ohm External Speaker



Share this Page