American Communication Systems
Home  >>  Eupen 4.3-10M50B14X
My Cart Cart    
My Account My Account


Eupen 4.3-10M50B14X

4.3-10 Male Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea
The connector is designed according the standard interface as 4.3-10. Contact components are silver or trimetal plated to minimize insertion loss and passive intermodulation products
Customer Rating:  
/
Vote!
Item SKU Number:  466711
FCA point / Shipped from:  USA 
 Download Free Materials:
  
Adobe Acrobat Reader Eupen-14-Hi-Flex-connectors-for-RF-cables-data-sheet.pdf (205.39 KB)
  
Adobe Acrobat Reader Eupen-14X-connectors-installation-instructions.pdf (3873.54 KB)
 Item Details:


Eupen 1/4 inch Hi-Flex Coaxial Cable Connectors

The connectors are designed with the standard interfaces such as N, Nex10, 4.3-10, or DIN 7-16. The contact components are coated with silver or trimetal to reduce the loss of signal and unwanted interference. The mechanical parts are covered with a layer of nickel to ensure durability and protection against corrosion. Watertightness is achieved simultaneously on the outer conductor and on the jacket by using a special silicone gasket. This watertight solution allows the use of ours connectors in the toughest environmental conditions. For a convenient and dependable installation that is also cost-effective, special trimming tools are highly recommended.

Available as:

4.3-10M50B14X 4.3-10 male, hiflex, 1/4" connector
7/16M50B14X 7/16 DIN male, hiflex, 1/4" connector
7/16M50BL14X 7/16 DIN male, right angle, hiflex, 1/4" connector
NEX10M50B14X NEX10 male, hiflex, 1/4" connector
NF50B14X N female, hiflex, 1/4" connector
NM50B14X N male, hiflex, 1/4" connector
NM50BL14X N male, hiflex, right angle, 1/4" connector

Features:

- Low reflection coefficient (up to 3.0 GHz)
- Low PIM level
- High contact force through inner contacts made in a high-strength copper alloy
- Provides watertight seal, ensuring protection against moisture and dust (IP67/IP68)
- Resistant to corrosion, maintaining long-lasting functionality
- Quick trimming tool for cable preparation
- Installation ”screw it on and tighten it”

Electrical characteristics:

Nominal impedance, Ohm: 50
Reflection coefficient @ 3 GHz, db: ≥34
Working voltage: 1 - 2.7 kV rms, 50 Hz (see pdf spec sheet)
Max peak power: 10 - 40 kW (see pdf spec sheet)
Temperature range: -40°F to +185°F (-40°C to +85°C)
External parts materials Brass with passivated silver or trimetal or electroless nickel plating
Outer contact: Brass with passivated silver or trimetal plating
Inner contact: Passivated silver plated high-strength copper alloy and brass
Dielectric: TXP / PTFE
O-Rings: High quality silicone
Special trimming tool: SPTC50B14X


 Similar or Related Products:

 These models may be compatible with your equipment:

EC1-50-HF-WB
EC1-50-HF-WB
Eupen


1/4" Hi-Flex Foam Coax Cable
7/16M50BL14X
7/16M50BL14X
Eupen


7/16 DIN Male Right Angle Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea
NM50BL14X
NM50BL14X
Eupen


N Male Right Angle Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea
NEX10M50B14X
NEX10M50B14X
Eupen


NEX10 Male Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea
NM50B14X
NM50B14X
Eupen


N Male Connector for 1/4" Hi-Flex Cable, O-Ring Style, 1 ea
NF50B14X
NF50B14X
Eupen


N Female Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea





 Last Viewed Items:

4.3-10M50B14X 4.3-10 Male Connector for 1/4" Hi-Flex Cable, O-Ring Type, 1 ea
F60 62 RC Icom IC-F60 Waterproof portable radio, UHF 450-512 MHz, 12.5/25 kHz Channel Spacing, 128 Channels, 5W. Intrinsically safe. Built-in UT-110 scrambler.
07-110-3412 Cadex charger battery adapter. To be used with batteries made for Matsushita UW-101 radio.
PMLN5610 2.5 inch / 63 mm Leather Swivel Belt Loop with D-Stud
MB-94EX Alligator Belt Clip, Blue
3662B-C Nylon Carry Case with Clip
SPM-2303QD Medium Duty 2-Wire Lapel Microphone with Surveillance Style Acoustic Tube Earphone, with Quick Disconnect Radio Adapter
SERMANRMU8125 Service Manual
F4261DS 36 ICOM IC-F4261D Waterproof Analog, LTR®, Digital UHF Portable Radio, 450-512 MHz, 5W, 512 Channels, 14-pin Accessory Connector, Inversion Scrambler Built-in, without Keypad
NFBF-10A Tunable Notch Filter and Band-Pass Filter (1200-2600 Hz)



Share this Page