|
| | BK Technologies (Relm) |
| 1. | | |
| | Works with BK BKR 5000, BKR 9000 two-way radios | | Shipped from: USA | |
| IP68 Rated: Completely protected against dust ingress. Protected against continuous immersion in water beyond 1 meter, under conditions specified by the manufacturer. | |
| 
 |
| |
| 2. | | |
| | Works with BK BKR 5000, BKR 9000 two-way radios | | Shipped from: USA | |
|
| 
 |
| |
| 3. | | |
| | For Listen only earphones use the KAA0221OTE or
KAA0222EH. Compatible with RELM / BK KNG-P150, KNG2-P150, KNG-P400, KNG2-P400, KNG-P500, KNG2-P500, KNG-P800, KNG2-P800 radios | | Shipped from: USA | |
| Does not have a Hi/Lo Volume Control | |
| 
 |
| |
| 4. | | |
| | For RELM/BK KNG-P150, KNG-P400, KNG-P500, KNG-P800 radios | | |
| Replaced by KAA0204-35 | |
| |
| |
| 5. | | |
| | Comes with KAA0811C antenna and KAA0221-203 earphone. For RELM / BK KNG-P150, KNG2-P150, KNG-P400, KNG2-P400, KNG-P500, KNG2-P500, KNG-P800, KNG2-P800 radios | | |
|
| 
 |
| |
| 6. | | |
| | For RELM/BK KNG-P150, KNG-P400, KNG-P500, KNG-P800 radios | | |
|
| |
| |
|
| | Icom |
| 15. | | |
| | Revolving clip, right angle 2-pin screw down connector, stereo mic/mono speaker. For use with ICOM IC-F3001, IC-F3011, IC-F3021, IC-F3230D, IC-F4001, IC-F4011, IC-F4021, IC-F4230D, IC-V3MR, IC-V10MR radios (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 16. | | |
| | Right angle 2-pin screw down connector, stereo mic/mono speaker. For use with ICOM IC-F14, IC-F24, IC-F3001, IC-F3011, IC-F3021, IC-F3230D, IC-F4001, IC-F4011, IC-F4021, IC-F4230D, IC-V3MR, IC-V10MR radios (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 17. | | |
| | With slim right angle connector. Works with ICOM ID-31A, ID-51A, ID-52A, IP100H, IP501H radios | | Shipped from: USA | |
|
| 
 |
| |
| 18. | | |
| | Heavy duty anchored KEVLAR coil cable, clothing clip and 3.5mm accessory jack, right angle 2-pin screw down connector. For ICOM radios (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 19. | | |
| | 2-pin screw down connector. For ICOM radios (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 20. | | |
| | With 3.5mm accessory jack, 9-pin connector. For ICOM radios (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 21. | | |
| | Heavy duty, with 3.5mm accessory jack, 14-pin connector. For use with ICOM IC-F3261D, IC-F4261D, IC-F3360D, IC-F4360D, IC-F9011, IC-F9021 radios | | Shipped from: USA | |
|
| 
 |
| |
|
| | Maxon (TecNet) |
| 30. | | |
| | Works with MAXON MDP-7124, MDP-7424 portable radios | | Shipped from: USA | |
|
| 
 |
| |
| 31. | | |
| | Works with Maxon, TecNet, Motorola and similar portables with 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 32. | | |
| | Works with Maxon, TecNet, Motorola and similar portables with 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
|
| | Motorola USA |
| 33. | | |
| | Designed specifically for the MOTOROLA R2 series two-way radios | | Shipped from: USA | |
| Digital Approved Accessory | | For Motorola USA products: a handling fee of $35.00 applies to all orders less than $125.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
|
| | Otto Engineering |
| 34. | | |
| | Works with ICOM IC-F1000 (D/T/S), IC-F2000 (D/T/S), IC-F3001, IC-F3011, IC-F3021 (T/S), IC-F4001, IC-F4011, IC-F4021 (T/S) radios that use 2-pin right angle connector with 2 screws (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 35. | | |
| | Works with HYTERA BD502i, BD552i, PD412i, PD502i, PD562i, TC-508, TC-518, TC-610, TC-620 radios that use 2-pin screw-down connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 36. | | |
| | Works with KENWOOD, RELM / BK, HYTERA and many Chinese radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 37. | | |
| | Works with KENWOOD NX-200G, NX-210G, NX-300G, NX-3200, NX-3300, NX-3400, NX-5200, NX-5300, NX-5400, TK-190, TK-290, TK-390, TK-2180, TK-3180 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 38. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 39. | | |
| | Works with MOTOROLA AXU4100, BPR40, CLS1410, CP200D, DTR550, GP300, RDV2020; RELM / BK RPU6500, RPV6500 and HYTERA PD-502, PD-562, TC-508, TC-518, TC-580 radios that use 2-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 40. | | |
| | Works with MOTOROLA APX3000, APX8000, DP2400, DP2600, DP3441, MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, XPR3300, XPR3500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 41. | | |
| | Works with VERTEX STANDARD / MOTOROLA / YAESU EVX-261, EVX-531, EVX-534, EVX-539, VX-231, VX-261, VX-264, VX-351, VX-354, VX-410, VX-420, VX-454, VX-451, VX-459 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 42. | | |
| | Works with SEPURA STP8000, STP9000, STP9100, STP9200, SC2020, SC2024 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 43. | | |
| | Works with Relm / BK KNG KNG-P150, KNG-P400, KNG-P500, KNG-P800, KNG2-P150, KNG2-P400, KNG2-P500, KNG2-P800 two-way radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 44. | | |
| | Works with Relm / BK KNG KNG-P150, KNG-P400, KNG-P500, KNG-P800, KNG2-P150, KNG2-P400, KNG2-P500, KNG2-P800 two-way radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 45. | | |
| | Works with Relm / BK KNG KNG-P150, KNG-P400, KNG-P500, KNG-P800, KNG2-P150, KNG2-P400, KNG2-P500, KNG2-P800 two-way radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 46. | | |
| | Works with Relm / BK KNG KNG-P150, KNG-P400, KNG-P500, KNG-P800, KNG2-P150, KNG2-P400, KNG2-P500, KNG2-P800 two-way radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 47. | | |
| | Works with Relm / BK KNG KNG-P150, KNG-P400, KNG-P500, KNG-P800, KNG2-P150, KNG2-P400, KNG2-P500, KNG2-P800 two-way radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 48. | | |
| | Works with Relm / BK KNG KNG-P150, KNG-P400, KNG-P500, KNG-P800, KNG2-P150, KNG2-P400, KNG2-P500, KNG2-P800 two-way radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 49. | | |
| | Works with Relm / BK KNG KNG-P150, KNG-P400, KNG-P500, KNG-P800, KNG2-P150, KNG2-P400, KNG2-P500, KNG2-P800 two-way radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 50. | | |
| | Works with Relm / BK KNG KNG-P150, KNG-P400, KNG-P500, KNG-P800, KNG2-P150, KNG2-P400, KNG2-P500, KNG2-P800 two-way radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 51. | | |
| | Works with ICOM IC-F52D, IC-F62D, IC-F3261, IC-F3400, IC-F4261, IC-F4400, IC-F7010, IC-F7020, IC-F7040, IC-F9011, IC-F9021 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 52. | | |
| | Works with ICOM IC-F50V, IC-F60V, IC-F70 (DT/DS/T/S), IC-F80 (DT/DS/T/S), IC-F3161 (DT/DS/T/S), IC-F4161 (DT/DS/T/S) radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 53. | | |
| | Works with ICOM IC-F1000 (D/T/S), IC-F2000 (D/T/S), IC-F3001, IC-F3011, IC-F3021 (T/S), IC-F4001, IC-F4011, IC-F4021 (T/S) radios that use 2-pin right angle connector with 2 screws (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 54. | | |
| | Works with HARRIS (M/A-Com) P5350, P5370, P5450, P5470, P5550, P5570, P7350, P7370, XG25, XG75 radios that use assembled multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 55. | | |
| | Works with HARRIS (M/A-Com) P5350, P5370, P5450, P5470, P5550, P5570, P7350, P7370, XG25, XG75 radios that use assembled multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 56. | | |
| | Works with HARRIS (M/A-Com) P5350, P5370, P5450, P5470, P5550, P5570, P7350, P7370, XG25, XG75 radios that use assembled multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 57. | | |
| | Works with EF JOHNSON Viking VP300, VP400, VP600, VP900 series radios that use Jedi style multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 58. | | |
| | Works with KENWOOD, RELM / BK, HYTERA and many Chinese radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 59. | | |
| | Works with KENWOOD NX-200G, NX-210G, NX-300G, NX-3200, NX-3300, NX-3400, NX-5200, NX-5300, NX-5400, TK-190, TK-290, TK-390, TK-2180, TK-3180 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 60. | | |
| | Works with KENWOOD NX-200G, NX-210G, NX-300G, NX-3200, NX-3300, NX-3400, NX-5200, NX-5300, NX-5400, TK-190, TK-290, TK-390, TK-2180, TK-3180 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 61. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 62. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 63. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 64. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 65. | | |
| | Works with MOTOROLA AXU4100, BPR40, CLS1410, CP200D, DTR550, GP300, RDV2020; RELM / BK RPU6500, RPV6500 and HYTERA PD-502, PD-562, TC-508, TC-518, TC-580 radios that use 2-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 66. | | |
| | Works with MOTOROLA XTS1500, XTS2500, XTS3000, XTS3500 and XTS5000 radios only | | Shipped from: USA | |
|
| 
 |
| |
| 67. | | |
| | Works with SEPURA STP8000, STP9000, STP9100, STP9200, SC2020, SC2024 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 68. | | |
| | Works with VERTEX STANDARD / MOTOROLA / YAESU EVX-261, EVX-531, EVX-534, EVX-539, VX-231, VX-261, VX-264, VX-351, VX-354, VX-410, VX-420, VX-454, VX-451, VX-459 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 69. | | |
| | Works with EF JOHNSON Viking VP300, VP400, VP600, VP900 series radios that use Jedi style multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
|
| | Power Products |
| 105. | |
|
|
| | Works with TAIT radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 106. | | |
| | Works with HYTERA BD502i, BD552i, PD412i, PD502i, PD562i, TC-508, TC-518, TC-610, TC-620 radios that use 2-pin screw-down connector (See a full list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 107. | | |
| | Works with ICOM IC-F1000 (D/T/S), IC-F2000 (D/T/S), IC-F3001, IC-F3011, IC-F3021 (T/S), IC-F4001, IC-F4011, IC-F4021 (T/S) radios that use 2-pin right angle connector with 2 screws (See a full list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 108. | | |
| | Works with KENWOOD, RELM / BK, HYTERA and many Chinese radios that use 2-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 109. | | |
| | Works with MOTOROLA, RELM / BK and HYTERA radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 110. | | |
| | Works with MOTOROLA XPR3000, XPR3000e, XPR3300, XPR3300e, XPR3500, XPR3500e radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 111. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 112. | | |
| | Works with TAIT TP3300, TP3550, TP8100, TP8110, TP8120, TP8140, TP9355, TP9360, TP9400, TP9440,TP9460, TP9600, TP9660 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 113. | | |
| | Works with VERTEX STANDARD / MOTOROLA / YAESU EVX-261, EVX-531, EVX-534, EVX-539, VX-231, VX-261, VX-264, VX-351, VX-354, VX-410, VX-420, VX-454, VX-451, VX-459 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 114. | | |
| | Works with Relm / BK KNG KNG-P150, KNG-P400, KNG-P500, KNG-P800, KNG2-P150, KNG2-P400, KNG2-P500, KNG2-P800 two-way radios | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 115. | | |
| | Works with HARRIS (M/A-Com) Jaguar 700Pi, 710P, P5100, P5130, P5150, P5200, P7100, P7130, P7150, P7170, P7200, P7230, P7250, P7270, SPD2000 radios that use assembled multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 116. | | |
| | Works with ICOM IC-F50V, IC-F60V, IC-F70 (DT/DS/T/S), IC-F80 (DT/DS/T/S), IC-F3161 (DT/DS/T/S), IC-F4161 (DT/DS/T/S) radios that use 9-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 117. | | |
| | Works with ICOM IC-F52D, IC-F62D, IC-F3261, IC-F3400, IC-F4261, IC-F4400, IC-F7010, IC-F7020, IC-F7040, IC-F9011, IC-F9021 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 118. | | |
| | Works with TAIT TP3300, TP3550, TP8100, TP8110, TP8120, TP8140, TP9355, TP9360, TP9400, TP9440,TP9460, TP9600, TP9660 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 119. | | |
| | Works with Relm / BK KNG KNG-P150, KNG-P400, KNG-P500, KNG-P800, KNG2-P150, KNG2-P400, KNG2-P500, KNG2-P800 two-way radios | | Shipped from: USA | |
| IP67 Rated: Protected against harmful dust contact and submersion in water up to 1 meter (or 3.3 feet) for up to 30 minutes. | | For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 120. | | |
| | Works with Relm / BK KNG KNG-P150, KNG-P400, KNG-P500, KNG-P800, KNG2-P150, KNG2-P400, KNG2-P500, KNG2-P800 two-way radios | | Shipped from: USA | |
| IP67 Rated: Protected against harmful dust contact and submersion in water up to 1 meter (or 3.3 feet) for up to 30 minutes. | | For Power Products products: a handling fee of $8.00 applies to all orders less than $175.00 (USD), exclusive of shipping charges. | |
| 
 |
| |
| 121. | | | Heavy Duty Speaker Microphone with 3.5mm Accessory more... | |
| |
|
| | Pryme |
| 122. | | |
| | Works with HYT / HYTERA radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 123. | | |
| | Works with HARRIS HDP250 and HYTERA PD602G, PD602i, PD605G, PD606G, PD662G, PD662i, PD682G, PD682i radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 124. | | |
| | Works with MOTOROLA APX3000, APX8000, DP2400, DP2600, DP3441, MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, XPR3300, XPR3500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 125. | | |
| | Works with KENWOOD, RELM / BK, HYTERA and many Chinese radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 126. | | |
| | Works with VERTEX STANDARD / YAESU FT-10R, FT-250, FT-40R, FT-50R, FT-60R, VX-10, VX-110, VX-150, VX-1R, VX-2E, VX-2R, VX-2R, VX-300, VX-400, VX-5R, VXF-1 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 127. | | |
| | Works with MOTOROLA AXU4100, BPR40, CLS1410, CP200D, DTR550, GP300, RDV2020; RELM / BK RPU6500, RPV6500 and HYTERA PD-502, PD-562, TC-508, TC-518, TC-580 radios that use 2-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 128. | | |
| | The PRYME Quick Disconnect is available for a wide range of radios, offering additional convenience and simplicity | | Shipped from: USA | |
| Order radio adapter separately | |
| 
 |
| |
| 129. | | |
| | Works with ICOM IC-F50V, IC-F60V, IC-F70 (DT/DS/T/S), IC-F80 (DT/DS/T/S), IC-F3161 (DT/DS/T/S), IC-F4161 (DT/DS/T/S) radios that use 9-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 130. | | |
| | Works with KENWOOD NX-200G, NX-210G, NX-300G, NX-3200, NX-3300, NX-3400, NX-5200, NX-5300, NX-5400, TK-190, TK-290, TK-390, TK-2180, TK-3180 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 131. | | |
| | Works with ICOM IC-F52D, IC-F62D, IC-F3261, IC-F3400, IC-F4261, IC-F4400, IC-F7010, IC-F7020, IC-F7040, IC-F9011, IC-F9021 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 132. | | |
| | Works with VERTEX STANDARD / MOTOROLA / YAESU EVX-261, EVX-531, EVX-534, EVX-539, VX-231, VX-261, VX-264, VX-351, VX-354, VX-410, VX-420, VX-454, VX-451, VX-459 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 133. | | |
| | Works with MOTOROLA and EF JOHNSON radios with Jedi style multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 134. | | |
| | Works with Amateur (HAM) radio models ID-31A, ID-51A, IP100H, IP501H, IP503H and similar (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 135. | | |
| | Works with ICOM IC-F1000 (D/T/S), IC-F2000 (D/T/S), IC-F3001, IC-F3011, IC-F3021 (T/S), IC-F4001, IC-F4011, IC-F4021 (T/S) radios that use 2-pin right angle connector with 2 screws (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 136. | | |
| | Works with VERTEX STANDARD / YAESU radios that use multie-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 137. | | |
| | Works with HYTERA TC-980 and MOTOROLA GP240, GP280, GP360, GP380, GP640, PRO5000, PRO7000 series radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 138. | | |
| | Works with VERTEX STANDARD / MOTOROLA / YAESU VX-120, VX-127, VX-170, VX-177, VX-6R, VX-7R, EVX-S24 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 139. | | |
| | Works with HYTERA TC-610P, TC-700P; MOTOROLA EX600, GP644, GP688 and RELM RP3000, RP7500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 140. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 141. | | |
| | Works with HYT / HYTERA radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 142. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HYT / HYTERA radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 143. | | |
| | Works with HARRIS HDP250 and HYTERA PD602G, PD602i, PD605G, PD606G, PD662G, PD662i, PD682G, PD682i radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 144. | | |
| | Works with MOTOROLA APX3000, APX8000, DP2400, DP2600, DP3441, MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, XPR3300, XPR3500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 145. | | |
| | Works with MOTOROLA iON, MXP600, R7 radios that use multi-pin connector | | Shipped from: USA | |
|
| 
 |
| |
| 146. | | |
| | Works with KENWOOD, RELM / BK, HYTERA and many Chinese radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 147. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with KENWOOD, RELM / BK, HYTERA and many Chinese radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 148. | | |
| | Works with VERTEX STANDARD / YAESU FT-10R, FT-250, FT-40R, FT-50R, FT-60R, VX-10, VX-110, VX-150, VX-1R, VX-2E, VX-2R, VX-2R, VX-300, VX-400, VX-5R, VXF-1 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 149. | | |
| | Works with MOTOROLA AXU4100, BPR40, CLS1410, CP200D, DTR550, GP300, RDV2020; RELM / BK RPU6500, RPV6500 and HYTERA PD-502, PD-562, TC-508, TC-518, TC-580 radios that use 2-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | | | |
| 
 |
| |
| 150. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with MOTOROLA AXU4100, BPR40, CLS1410, CP200D, DTR550, GP300, RDV2020; RELM / BK RPU6500, RPV6500 and HYTERA PD-502, PD-562, TC-508, TC-518, TC-580 radios | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | | | |
| 
 |
| |
| 151. | | |
| | The PRYME Quick Disconnect is available for a wide range of radios, offering additional convenience and simplicity | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | | Order radio adapter separately | |
| 
 |
| |
| 152. | | |
| | Works with ICOM IC-F50V, IC-F60V, IC-F70 (DT/DS/T/S), IC-F80 (DT/DS/T/S), IC-F3161 (DT/DS/T/S), IC-F4161 (DT/DS/T/S) radios that use 9-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 153. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with ICOM IC-F50V, IC-F60V, IC-F70 (DT/DS/T/S), IC-F80 (DT/DS/T/S), IC-F3161 (DT/DS/T/S), IC-F4161 (DT/DS/T/S) radios that use 9-pin connector | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 154. | | |
| | Works with KENWOOD NX-200G, NX-210G, NX-300G, NX-3200, NX-3300, NX-3400, NX-5200, NX-5300, NX-5400, TK-190, TK-290, TK-390, TK-2180, TK-3180 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 155. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with KENWOOD NX-200G, NX-210G, NX-300G, NX-3000, NX-5000, TK-2180, TK-3180 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 156. | | |
| | Works with ICOM IC-F52D, IC-F62D, IC-F3261, IC-F3400, IC-F4261, IC-F4400, IC-F7010, IC-F7020, IC-F7040, IC-F9011, IC-F9021 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 157. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with ICOM IC-F52D, IC-F62D, IC-F3261, IC-F3400, IC-F4261, IC-F4400, IC-F7010, IC-F7020, IC-F7040, IC-F9011, IC-F9021 radios that use 14-pin connector | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 158. | | |
| | Works with VERTEX STANDARD / MOTOROLA / YAESU EVX-261, EVX-531, EVX-534, EVX-539, VX-231, VX-261, VX-264, VX-351, VX-354, VX-410, VX-420, VX-454, VX-451, VX-459 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 159. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with VERTEX STANDARD / MOTOROLA / YAESU EVX-261, EVX-531, EVX-534, EVX-539, VX-231, VX-261, VX-264, VX-351, VX-354, VX-410, VX-420, VX-454, VX-451, VX-459 radios | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 160. | | |
| | Works with MOTOROLA and EF JOHNSON radios that use Jedi style multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 161. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with MOTOROLA and EF JOHNSON radios that use Jedi style multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 162. | | |
| | Works with HARRIS (M/A-Com) radios that use assembled multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 163. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HARRIS (M/A-Com) radios that use assembled multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 164. | | |
| | Works with ICOM IC-F1000 (D/T/S), IC-F2000 (D/T/S), IC-F3001, IC-F3011, IC-F3021 (T/S), IC-F4001, IC-F4011, IC-F4021 (T/S) radios that use 2-pin right angle connector with 2 screws (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 165. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with ICOM IC-F1000 (D/T/S), IC-F2000 (D/T/S), IC-F3001, IC-F3011, IC-F3021 (T/S), IC-F4001, IC-F4011, IC-F4021 (T/S) radios that use 2-pin connector with 2 screws | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 166. | | |
| | Works with VERTEX STANDARD / YAESU radios that use multie-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 167. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with VERTEX STANDARD / YAESU radios that use multie-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 168. | | |
| | Works with HYTERA TC-980 and MOTOROLA GP240, GP280, GP360, GP380, GP640, PRO5000, PRO7000 series radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 169. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HYTERA TC-980 and MOTOROLA GP240, GP280, GP360, GP380, GP640, PRO5000, PRO7000 series radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 170. | | |
| | Works with M/A-COM radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 171. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with M/A-COM radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 172. | | |
| | Works with VERTEX STANDARD / MOTOROLA / YAESU VX-120, VX-127, VX-170, VX-177, VX-6R, VX-7R, EVX-S24 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 173. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with VERTEX STANDARD / MOTOROLA / YAESU VX-120, VX-127, VX-170, VX-177, VX-6R, VX-7R, EVX-S24 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 174. | | |
| | Works with HYTERA TC-610P, TC-700P; MOTOROLA EX600, GP644, GP688 and RELM RP3000, RP7500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 175. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HYTERA TC-610P, TC-700P; MOTOROLA EX600, GP644, GP688 and RELM RP3000, RP7500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 176. | | |
| | Works with M/A-COM radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 177. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with M/A-COM radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 178. | | |
| | Works with HARRIS and HYTERA radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 179. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HARRIS and HYTERA radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 180. | | |
| | Includes wall charger and charging cable. Works with HYTERA TC-310, TC-320; MOTOROLA TalkAbout Walkie-Talkies and COBRA MicroTALK FRS series radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 181. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 182. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580 radios | | Shipped from: USA | |
| Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G | |
| 
 |
| |
| 183. | | |
| | Works with HYT / HYTERA radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 184. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HYT / HYTERA radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 185. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HARRIS HDP250 and HYTERA PD602G, PD602i, PD605G, PD606G, PD662G, PD662i, PD682G, PD682i radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 186. | | |
| | Works with MOTOROLA APX3000, APX8000, DP2400, DP2600, DP3441, MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, XPR3300, XPR3500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 187. | | |
| | Includes PTT-1500B Push-To-Talk junction box. Works with TAIT TP3000, TP8100, TP9300, TP9400, TP9600 series radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 188. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with TAIT TP3000, TP8100, TP9300, TP9400, TP9600 series radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 189. | | |
| | Works with KENWOOD, RELM / BK, HYTERA and many Chinese radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 190. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with KENWOOD, RELM / BK, HYTERA and many Chinese radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 191. | | |
| | Works with MOTOROLA AXU4100, BPR40, CLS1410, CP200D, DTR550, GP300, RDV2020; RELM / BK RPU6500, RPV6500 and HYTERA PD-502, PD-562, TC-508, TC-518, TC-580 radios that use 2-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 192. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with MOTOROLA AXU4100, BPR40, CLS1410, CP200D, DTR550, GP300, RDV2020; RELM / BK RPU6500, RPV6500 and HYTERA PD-502, PD-562, TC-508, TC-518, TC-580 radios | | Shipped from: USA | |
|
| 
 |
| |
| 193. | | |
| | The PRYME Quick Disconnect is available for a wide range of radios, offering additional convenience and simplicity | | Shipped from: USA | |
| Order radio adapter separately | |
| 
 |
| |
| 194. | | |
| | Works with ICOM IC-F50V, IC-F60V, IC-F70 (DT/DS/T/S), IC-F80 (DT/DS/T/S), IC-F3161 (DT/DS/T/S), IC-F4161 (DT/DS/T/S) radios that use 9-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 195. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with ICOM IC-F50V, IC-F60V, IC-F70 (DT/DS/T/S), IC-F80 (DT/DS/T/S), IC-F3161 (DT/DS/T/S), IC-F4161 (DT/DS/T/S) radios that use 9-pin connector | | Shipped from: USA | |
|
| 
 |
| |
| 196. | | |
| | Works with KENWOOD NX-200G, NX-210G, NX-300G, NX-3200, NX-3300, NX-3400, NX-5200, NX-5300, NX-5400, TK-190, TK-290, TK-390, TK-2180, TK-3180 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 197. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with KENWOOD NX-200G, NX-210G, NX-300G, NX-3000, NX-5000, TK-2180, TK-3180 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 198. | | |
| | Works with ICOM IC-F52D, IC-F62D, IC-F3261, IC-F3400, IC-F4261, IC-F4400, IC-F7010, IC-F7020, IC-F7040, IC-F9011, IC-F9021 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 199. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with ICOM IC-F52D, IC-F62D, IC-F3261, IC-F3400, IC-F4261, IC-F4400, IC-F7010, IC-F7020, IC-F7040, IC-F9011, IC-F9021 radios that use 14-pin connector | | Shipped from: USA | |
|
| 
 |
| |
| 200. | | |
| | Works with VERTEX STANDARD / MOTOROLA / YAESU EVX-261, EVX-531, EVX-534, EVX-539, VX-231, VX-261, VX-264, VX-351, VX-354, VX-410, VX-420, VX-454, VX-451, VX-459 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 201. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with VERTEX STANDARD / MOTOROLA / YAESU EVX-261, EVX-531, EVX-534, EVX-539, VX-231, VX-261, VX-264, VX-351, VX-354, VX-410, VX-420, VX-454, VX-451, VX-459 radios | | Shipped from: USA | |
|
| 
 |
| |
| 202. | | |
| | Works with MOTOROLA and EF JOHNSON radios that use Jedi style multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 203. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with MOTOROLA and EF JOHNSON radios that use Jedi style multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 204. | | |
| | Works with ICOM IC-F1000 (D/T/S), IC-F2000 (D/T/S), IC-F3001, IC-F3011, IC-F3021 (T/S), IC-F4001, IC-F4011, IC-F4021 (T/S) radios that use 2-pin right angle connector with 2 screws (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 205. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with ICOM IC-F1000 (D/T/S), IC-F2000 (D/T/S), IC-F3001, IC-F3011, IC-F3021 (T/S), IC-F4001, IC-F4011, IC-F4021 (T/S) radios that use 2-pin connector with 2 screws | | Shipped from: USA | |
|
| 
 |
| |
| 206. | | |
| | Works with VERTEX STANDARD / YAESU radios that use multie-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 207. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with VERTEX STANDARD / YAESU radios that use multie-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 208. | | |
| | Works with HYTERA TC-980 and MOTOROLA GP240, GP280, GP360, GP380, GP640, PRO5000, PRO7000 series radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 209. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HYTERA TC-980 and MOTOROLA GP240, GP280, GP360, GP380, GP640, PRO5000, PRO7000 series radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 210. | | |
| | Works with M/A-COM radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 211. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with M/A-COM radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 212. | | |
| | Works with HYTERA TC-610P, TC-700P; MOTOROLA EX600, GP644, GP688 and RELM RP3000, RP7500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 213. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HYTERA TC-610P, TC-700P; MOTOROLA EX600, GP644, GP688 and RELM RP3000, RP7500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 214. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with M/A-COM radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 215. | | |
| | Works with HARRIS and HYTERA radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 216. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HARRIS and HYTERA radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 217. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 218. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580 radios | | Shipped from: USA | |
|
| 
 |
| |
| 219. | | |
| | Works with HYTERA BD502i, BD552i, PD412i, PD502i, PD562i, TC-508, TC-518, TC-610, TC-620 radios that use 2-pin screw-down connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 220. | | |
| | An advanced wired microphone designed for newer Android and Apple smartphones and tablets with USB-C ports. It supports various Push-to-Talk over Cellular (PoC) applications, enabling clear, walkie-talkie-style communication over the internet | | Shipped from: USA | |
|
| 
 |
| |
| 221. | | |
| | Works with KENWOOD, RELM / BK, HYTERA and many Chinese radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 222. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with KENWOOD, RELM / BK, HYTERA and many Chinese radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 223. | | |
| | Works with MOTOROLA AXU4100, BPR40, CLS1410, CP200D, DTR550, GP300, RDV2020; RELM / BK RPU6500, RPV6500 and HYTERA PD-502, PD-562, TC-508, TC-518, TC-580 radios that use 2-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 224. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with MOTOROLA AXU4100, BPR40, CLS1410, CP200D, DTR550, GP300, RDV2020; RELM / BK RPU6500, RPV6500 and HYTERA PD-502, PD-562, TC-508, TC-518, TC-580 radios | | Shipped from: USA | |
|
| 
 |
| |
| 225. | | |
| | The PRYME Quick Disconnect is available for a wide range of radios, offering additional convenience and simplicity | | Shipped from: USA | |
| Order radio adapter separately | |
| 
 |
| |
| 226. | | |
| | Works with ICOM IC-F50V, IC-F60V, IC-F70 (DT/DS/T/S), IC-F80 (DT/DS/T/S), IC-F3161 (DT/DS/T/S), IC-F4161 (DT/DS/T/S) radios that use 9-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 227. | | |
| | Works with ICOM IC-F50V, IC-F60V, IC-F70 (DT/DS/T/S), IC-F80 (DT/DS/T/S), IC-F3161 (DT/DS/T/S), IC-F4161 (DT/DS/T/S) radios that use 9-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 228. | | |
| | Works with KENWOOD radios with multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 229. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with KENWOOD radios with multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 230. | | |
| | Works with MOTOROLA and EF JOHNSON radios with Jedi style multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 231. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with MOTOROLA and EF JOHNSON radios with Jedi style multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 232. | | |
| | Works with M/A-COM radios with multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 233. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with M/A-COM / HARRIS radios with multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 234. | | |
| | Works with M/A-COM / HARRIS radios with multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 235. | | |
| | Works with M/A-COM / HARRIS radios with multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 236. | | |
| | Works with HYTERA and HARRIS radios with multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 237. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HYTERA and HARRIS radios with multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 238. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 239. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580 radios | | Shipped from: USA | |
|
| 
 |
| |
| 240. | | |
| | Works with HYT / HYTERA radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 241. | | |
| | Works with HARRIS HDP250 and HYTERA PD602G, PD602i, PD605G, PD606G, PD662G, PD662i, PD682G, PD682i radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 242. | | |
| | Works with MOTOROLA APX3000, APX8000, DP2400, DP2600, DP3441, MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, XPR3300, XPR3500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 243. | | |
| | Works with MOTOROLA iON, MXP600, R7 radios that use multi-pin connector | | Shipped from: USA | |
|
| 
 |
| |
| 244. | | |
| | Works with KENWOOD, RELM / BK, HYTERA and many Chinese radios that use 2-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 245. | | |
| | Works with VERTEX STANDARD / YAESU FT-10R, FT-250, FT-40R, FT-50R, FT-60R, VX-10, VX-110, VX-150, VX-1R, VX-2E, VX-2R, VX-2R, VX-300, VX-400, VX-5R, VXF-1 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 246. | | |
| | Works with MOTOROLA AXU4100, BPR40, CLS1410, CP200D, DTR550, GP300, RDV2020; RELM / BK RPU6500, RPV6500 and HYTERA PD-502, PD-562, TC-508, TC-518, TC-580 radios that use 2-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 247. | | |
| | Works with ICOM IC-F50V, IC-F60V, IC-F70 (DT/DS/T/S), IC-F80 (DT/DS/T/S), IC-F3161 (DT/DS/T/S), IC-F4161 (DT/DS/T/S) radios that use 9-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 248. | | |
| | Works with VERTEX STANDARD / MOTOROLA / YAESU EVX-261, EVX-531, EVX-534, EVX-539, VX-231, VX-261, VX-264, VX-351, VX-354, VX-410, VX-420, VX-454, VX-451, VX-459 radios that use 1-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 249. | | |
| | Works with Amateur (HAM) radio models ID-31A, ID-51A, IP100H, IP501H, IP503H and similar (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 250. | | |
| | Works with ICOM IC-F1000 (D/T/S), IC-F2000 (D/T/S), IC-F3001, IC-F3011, IC-F3021 (T/S), IC-F4001, IC-F4011, IC-F4021 (T/S) radios that use 2-pin right angle connector with 2 screws (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 251. | | |
| | Works with HYTERA TC-980 and MOTOROLA GP240, GP280, GP360, GP380, GP640, PRO5000, PRO7000 series radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 252. | | |
| | Works with HYTERA TC-610P, TC-700P; MOTOROLA EX600, GP644, GP688 and RELM RP3000, RP7500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 253. | | |
| | Works with HARRIS and HYTERA radios that use multi-pin connector (See a list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 254. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 255. | | |
| | Works with ICOM IC-F50V, IC-F60V, IC-F70 (DT/DS/T/S), IC-F80 (DT/DS/T/S), IC-F3161 (DT/DS/T/S), IC-F4161 (DT/DS/T/S) radios that use 9-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 256. | | |
| | Works with KENWOOD NX-200G, NX-210G, NX-300G, NX-3200, NX-3300, NX-3400, NX-5200, NX-5300, NX-5400, TK-190, TK-290, TK-390, TK-2180, TK-3180 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 257. | | |
| | Works with ICOM IC-F52D, IC-F62D, IC-F3261, IC-F3400, IC-F4261, IC-F4400, IC-F7010, IC-F7020, IC-F7040, IC-F9011, IC-F9021 radios that use 14-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 258. | | |
| | Works with MOTOROLA APX1000, APX3000, APX4000, APX6000, APX7000, APX8000, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7350, XPR7550, XPR7580, SRX2200 radios that use multi-pin connector | | Shipped from: USA | |
|
| 
 |
| |
| 259. | | |
| | Works with MOTOROLA APX3000, APX8000, DP2400, DP2600, DP3441, MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, XPR3300, XPR3500 radios that use multi-pin connector (See a full list of compatible models) | | Shipped from: USA | |
|
| 
 |
| |
| 260. | | |
| | Works with MOTOROLA R7, MXP600 and ION series radio that use multi-pin connector | | Shipped from: USA | |
|
| 
 |
| |
| 261. | | |
| | Works with TAIT TP3000, TP8100, TP9300, TP9400, TP9600 series radios that use multi-pin connector (See a full list of compatible models) | | |
| Minimum order quantity: 25 pcs, lead time 8-10 weeks | |
| 
 |
| |
| 262. | | |
| | Works with HYTERA TC-310, TC-320; MOTOROLA TalkAbout Walkie-Talkies and COBRA MicroTALK FRS series radios that use 1-pin connector (See a full list of compatible models) | | |
|
| 
 |
| |
| 263. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with HYTERA radios with 2-pin connector (See a list of compatible models) | | |
|
| 
 |
| |
| 264. | | |
| | Works with VERTEX STANDARD / YAESU radios with multie-pin connector (See a list of compatible models) | | |
|
| 
 |
| |
| 265. | | |
| | Push-pull mechanism locks the Mic to the Radio Adapter but is also easy to release. Works with VERTEX STANDARD / YAESU radios with multie-pin connector (See a list of compatible models) | | |
|
| 
 |
| |
|