ICOM IC-A4 VHF Air Band Transceiver
Maximize
your ground crew communications
Rugged construction
The one piece, die-cast
aluminum chassis and polycarbonate front panel provide the durability needed
for reliable operation under the most demanding conditions.
Simple operation
Reliable communication
is essential in the hectic airport work environment. The IC-A4's large
display is easy to read and shows operating status at a glance. Up/down
keys allow you to change channels quickly and easily. Up to 19 memory channels
can be programmed for easy recall.
PC programmable
PC programming and cloning
allows you to customize each radio to your needs. Transmit can be inhibited
by channel. (These features must be activated by your dealer.)
Alpha memory
The channel name function
allows you to assign up to 5-character alpha names to each channel. This
provides a convenient way to remember channel contents and to recognize
selected channels at a glance.
Compact body
Measuring only 58(W) ×
140.5(H) × 32.3(D) mm*, the IC-A4 is
truly portable. Small enough to fit into a pocket.
*
2 9/32(W) × 5 17/32(H) × 1 9/32(D) in
Other features
-
LCD backlighting allows you
to read the display easily during nighttime operation
-
Maintenance-free EEPROM stores
memory channel information
-
Side-tone permits hearing your
own transmitted audio while using a standard aviation headset (optional
headset adapter required __ OPC-752)
-
Standard headset cable can
be used with the optional OPC-752
-
Optional longer life 1050 mAh
battery available, same physical size!!
-
Optional (AA) alkaline battery
case available __ holds 8 batteries
SPECIFICATIONS
GENERAL |
Frequence range |
: Tx 118.000
- 136.975 MHz
Rx 108.000
- 136.975 MHz |
Mode |
: 6K00A3E (AM) |
Number of memory channels |
: 19 |
Operating temperature range |
: -10°C to +50°C;
+14°F to +122°F |
Frequency stability |
: ±10 ppm (0°C
to +50°C) |
Power supply requirement |
: 9.6 V DC ±15%
(negative ground) |
Current drain
(at 9.6 V DC) |
: Tx |
max.power |
0.7 A typical |
Rx |
standby
max.audio |
230 mA typical
55 mA typical |
|
Antenna connector |
: BNC (50 Ohm) |
Dimensions (projections
not included) |
: 58(W) &tines; 140.5(H)
&tines; 32.3(D) mm
2 9/32(W) &tines;
5 17/32(H) &tines; 1 9/32(D) in |
Weight (incl. antenna and
battery pack) |
: 425 g; 1 5 oz (approx.) |
|
TRANSMITTER |
Output power (typical) |
: 3.7 W (PEP)
1.0 W (CW) |
Modulation system |
: Low level modulation |
Spurious emissions |
: Less than -60 dB |
External microphone connector |
: 3-conductor 2.5 (d) mm
(1/10")/150 Ohm |
|
RECEIVER |
Receive system |
: Double-conversion superheterodyne |
Intermediate
frequencies |
: 1st 28.95
MHz
2nd
450 kHz |
Sensitivity (at 6 dB S/N) |
: Less than 1.0 µV
(pd) |
Squelch sensitivity |
: Less than 1.0 µV
(pd; THD) |
Selectivity |
: More than 8 kHz/-6 dB
Less than 25 kHz/-60
dB |
Spurious response rejection
ratio |
: More than 60 dB |
Audio output power (at
9.6 V DC) |
: More than 500 mW
at 1 10% distortion with an 8 Ohm load |
External SP connector |
: 3-conductor 3.5 (d) mm
(1/8")/8 Ohm |
The IC-A4 meet MIL-STD requirements
and strict environmental standards for shock (MIL810C, D, E) and vibration
(MIL810C, D, E).
Supplied Accessories:
-
Battery pack*
-
Wall charger*
-
Belt clip
-
Antenna
-
Handstrap
*
Depending on version.
All stated specifications
are subject to change without notice or obligation.
Accessories
BATTERY PACKS CASE
-
BP-194
R6(AA) batteries × 8*
-
BP-195
9.6 V , 700 mAh
-
BP-196
9.6 V , 1050 mAh
*Ni-Cd
cells in BP-194 BATTERY CASE
must be purchased separately.
-
BC-119 DESKTOP CHARGER
+AD-81 DESKTOP CHARGER ADAPTER
Rapidly charge battery
packs. Cannot be used to charge Ni-Cd cells installed in the BP-194. Both
AC and DC can be used to power the charger. The AD-81 must be purchased
separately.
-
BC-121 DESKTOP CHARGER
+AD-81 DESKTOP CHARGER ADAPTER(6 pcs.)
For rapid charging up to
6 battery packs. Cannot be used to charge Ni-Cd cells installed in the
BP-1 94. Both AC and DC can be used to power the charger. The AD-81's must
be purchased separately.
-
CP-12/L CIGARETTE LIGHTER
CABLE WITH NOISE FILTER
-
OPC-254/L DC POWER CABLE
Allows you to charge the
connected battery pack (13.5 to 16 v DC required). For charging ONLY __
the transceiver cannot be simultaneously operated.
-
HM-119 SPEAKER-MICROPHONE
Durable, full-sized speaker-microphone
-
BC-110A/D/V WALL CHARGER
Regularly charges battery
packs. The same as supplied with some versions.
-
OPC-474 CLONING CABLE
Used for handheld to handheld
data cloning.
-
OPC-752 HEADSET ADAPTER
CABLE
Allows you to work with
most aviation headsets. Provides a side tone function. This is supplied
with some versions.
-
MB-68 BELT CLIP
The same as supplied.
-
BC-124 AC ADAPTER
Used for BC-121. Output
voltage/current: 12 V/7 A
-
BC-133 BATTERY CHARGER
Regularly charges a battery
pack with/without transceiver.
|