ICOM IC-F4TR UHF Trunked Radio
The
ideal subscriber unit for UHF SMR and ESMR operations
Many of today's Community Repeater
and Specialized Mobile Radio (SMR) operators are considering the emerging
business opportunities in UHF trunking. Also, the new Enhanced Specialized
Mobile Radio (ESMR) network solutions are an effective strategy for the
traditional dispatch market now being attacked by PCS and Cellular phone
competition. The Icom IC-F4TR is the perfect subscriber unit for this strong
and viable market. Conventional operation, basic LTR(R)
and PassPort(R) are
all built-in offering you a complete upgrade path as your system grows.
Flash memory will enable the easy addition of future system enhancements
as they are developed. Icom radios are known for their rugged MIL spec.
reliability and solid performance, and so is the IC-F4TR, a strict requirement
for a problem-free fleet radio. All the most popular system features are
included but unnecessary and complicated features have been eliminated
to keep the operation simple. The Icom IC-F4TR is a cost effective, rugged
and reliable subscriber unit with a built-in upgrade path to increase your
loading factor and Revenue Per Unit (RPU).
Multiple modes
Conventional, basic LTR (R)
and PassPort (R) are
built-in. Conventional operation and talk-around are both available from
the front panel during LTR (R)
and PassPort (R) operation.
Flash memory enables future system upgrades and future compatibility with
other protocols.
Conventional features
250 channels either 12.5 kHz or 25
kHz, CTCSS, DTCS and alpha names.
LTR (R)
features
50 systems with up to 100 groups
per system. All basic LTR (R)
system features.
PassPort (R)
features
60,000 useable ID's, individual mobile
ID's and roamer ID's, wide area dispatch, selective calling, ESN (Electrical
Serial Number) check, message trunking, OTAR (Over the Air Re-programming),
automatic registration, call forwarding and voice mail.
Advanced trunking performance
Our new Fractional-N system for ultra
high-speed PLL lock-up provides faster acquisition times and efficient
trunking performance. The built-in receive signal strength indicator (RSSI)
enables seamless roaming under the PassPort (R)
protocol, as the IC-F4TR automatically registers with the nearest site
(does not rely on BER calculations which slow down the registration process).
Simple and keypad versions
Select which is right for you, the
keypad version with full interconnect capability or the simple dispatch
subscriber unit without keypad.
Entire UHF bandwidth usable
Three bandwidth versions (400-30
MHz, 450-90 MHz, and 480-12 MHz) all have switchable 12.5/25 kHz width
by channel, and 5/6.25 kHz frequency pitch making all the new UHF channels
available for trunking, even if your channels aren't right next to each
other.
Alphanumeric display
The 8-digit LCD display has 18 icons
that indicate system status and operational selections, including battery
condition. The new 11-segment character set may be toggled from the control
panel between system/group numbers or PC pre-programmed alpha names.
Programmable keys
Each version has 7 PC programmable
keys, which may be assigned functions to customize operations for end users.
System/Group, Home System, Scan/Scan clear, Talk around, Auto dialler,
and keypad lock are some assignment examples.
Advanced PC programming
You may assign mode (conventional,
LTR (R) or PassPort
(R))
by system, default talk group for home button, power-ON home or previous
group, over the air programming for PassPort (R)
, network roaming, 53 MHz off-set by channel, LTR (R)
polarity by system, home channel and area bit by system, Tx and Rx ID,
and UID for PassPort (R).
MIL grade durability
Durable design features a one-piece
aluminum die-cast chassis, polycarbonate front panel and screw type antenna.
The IC-F4TR meets MIL spec. C, D and E.
Multiple scan mode
Conventional, system and group scan
enable continuous contact under multi system operation without any action
by the end-user.
Other features
-
Powerful 4 W output with the standard
battery
-
1050 mAh Ni-Cd battery pack
-
CTCSS, DTCS and DTMF encoder/decoder
built-in
-
Scanning, Time-out timer functions available
-
IBM/PC Windows(R)
programming capabilities
-
DTMF encoder/decoder, selective call,
ANI and stun/kill
-
CTCSS/DCS encode decode and reverse burst,
and more...
SPECIFICATIONS
GENERAL |
Frequency range |
: 400-30 MHz, 450-90 MHz, 480-12
MHz |
Type of emission |
: 16K0F3E (25 kHz)
11K0F3E (12.5 kHz) |
PLL channel step |
: 5 kHz, 6.25 kHz |
Antenna impedance |
: 50 Ohm |
Usable temperature range |
: -30°C to +60°C; -22°F
to +140°F |
Frequency error |
: ±2.5 ppm |
Power supply requirement |
: 9.6 V DC (Icom battery pack) |
Current drain (approx.) |
: Transmit
Receive |
at 4 W
at 1 W
stand-by
rated output |
1.4 A
0.7 A
110 mA
280 mA |
|
Dimensions
(projections not included) |
: 57(W) × 140(H) × 37
(D) mm
; 2 1/4(W) × 5 1/2(H)
× 1 15/32(D) in |
Weight (with BP-196) |
: 390 g; 13.8 oz |
|
TRANSMITTER |
Modulation system |
: Variable reactance frequency modulation |
Output power |
: 4 W |
Max. freq. deviation |
: ±5 kHz (25 kHz)
±2.5 kHz (12.5 kHz) |
Spurious emissions |
: 70 dB typical |
Adjacent Ch. power |
: 75 dB typical (25 kHz)
70 dB typical (12.5 kHz) |
Audio harmonic distortion |
: 5% max. |
Residual modulation |
: 40 dB (25 kHz)
34 dB (12.5 kHz) |
Limiting character of modulation |
: 60-100% |
External MIC connector |
: 3-conductor 2.5 (d) mm (1/10")/2.2 kOhm |
|
RECEIVER |
Intermediate freq. |
: 1st 47.25 MHz
2nd 450 kHz |
Sensitivity |
: 0.3 µV (at 12 dB SINAD) |
Squelch sensitivity |
: 0.3 µV (typical; at threshold) |
Adjacent Ch. selectivity |
: 70 dB typical (25 kHz)
65 dB typical (12.5 kHz) |
Spurious response |
: 70 dB typical |
Intermodulation rejection ratio |
: 75 dB typical |
Hum and noise ratio |
: 48 dB typical (25 kHz)
43 dB typical (12.5 kHz) |
Audio output power |
: 500 mW (at 5% distortion with an
8 Ohm load) |
External SP connector |
: 2-conductor 3.5 (d) mm (1/8")/8 Ohm |
Applicable U.S. Military Specifications
Icom makes rugged products that meet
MIL-STD requirements and strict environmental standards as follows.
Standard |
MIL
810C |
MIL
810D |
MIL
810E |
Method |
Procedure |
Method |
Procedure |
Method |
Procedure |
Vibration |
514.2 |
X |
514.3 |
I |
514.4 |
I |
Shock |
516.2 |
I |
516.3 |
I |
516.4 |
I |
Measurements made in accordance with
EIA/TIA-603. All stated specifications are typical and subject to change
without notice or obligation.
Microsoft and Windows are registered
trademarks of Microsoft Corporation in the U.S.A. and other countries.
PassPort is a registered trade mark of the Trident Datacom Technologies,
Inc. LTR is a registered trademark of the EFJohnson Radio Systems.
Accessories
BATTERY PACKS AND CASE |
*
Ni-Cd cells in the BP-194 BATTERY CASE must be purchased separately. Approx.
output power and operating times (Tx (Hi): Rx: standby=5:5:90)
BP-194
(w/700 mAh Ni-Cd cells) |
BP-195 |
BP-196 |
4 W typ./4.5
hrs. |
4 W typ.
/4.5 hours |
4 W typ.
/6.5 hours |
|
-
HM-46
Slim dimensions. Equipped with an
earphone jack and a transmit indicator.
-
HM-75A
Allows you to remotely select operating
channel, etc. during conventional operation.
-
AD-98FSC ANTENNA CONNECTOR ADAPTER
Allows you to connect a BNC-type
antenna.
-
HM-54
Durable, full-sized speaker-microphone.
-
BC-121 MULTI-CHARGER + AD-94
CHARGER ADAPTER + BC-124 AC ADAPTER
For rapid charging of up to 6 battery
packs (six AD-81s are required.), BP-195 or BP-196. The BC-124 outputs
12 V DC and has 7 A capacity for the BC-121. Charging time: 1.5 to 2 hours.
-
BC-119 DESKTOP CHARGER + AD-81
CHARGER ADAPTER
For rapid charging of battery pack,
BP-195 or BP-196. An AC adapter is supplied with the charger. Charging
time: 1.5 to 2 hours
-
BC-133 BATTERY CHARGER
Regularly charges a battery pack,
BP-195 or BP-196, with/without transceiver. The AC adapter, BC-122, is
additionally required.
-
BC-110A/C/D/V WALL CHARGER
Use for charging the connected battery
pack.
-
HS-51 HEADSET
For hands-free operation. Includes
VOX, PTT and "one-touch" PTT with a time-out timer.
-
MB-68 BELT CLIP
Allows you to attach the transceiver
to your belt. The same as that supplied with the transceiver.
-
SP-13 EARPHONE
Provides clear audio in noisy environment.
-
OPC-254L DC POWER CABLE + CP-12L
CIGARETTE LIGHTER CABLE WITH NOISE FILTER
Allows you to charge a battery pack
connected to the transceiver via a DC power source (12-16 V DC). For charging
ONLY__the transceiver cannot be simultaneously operated.
|