Icom F40GT 01
Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G More...
Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G More...
: Channel up/down
: Scan A/B start/stop : Monitor : High/Low : Trunking group SW : Emergency single/repeat : OPT 1/2/3 momentary |
: Bank up
: Scan Tag add/delete : Scrambler : Talk around : Tx code enter : DTMF autodial : Compand |
: Call
: Priority A/B : C. Tone CH enter : ID-MR select : Re-dial : Turbo SpeeDial A/B/C/D : Wide/Narrow |
: Beep
: Key lock : MR-CH 1/2/3/4 : Null (Light) : Tx code CH select : Special function 1/2 |
Advanced PC programming for Microsoft® Windows® 95/98
256 memory Channels
Up to 256 memory Channels
with 12 character channel names can be stored with up to 16 banks. The
rotary selector allows you to select each bank or memory Channel.
Simultaneously work 2
optional internal units
2 optional units can be
installed and will work simultaneously. You can select optional units to
suit your needs and to provide versatile usage.
* Same optional types, such as UT-109 and UT-110, can not be installed simultaneously.
Prolonged Ni-MH battery
The Ni-MH battery is designed
for 10 hours operation. A battery case is optionally available for using
a set of alkaline batteries (six AA (R6) cells) during charging.
Built-in Compander function
Built-in Compander function
provides clear audio quality under noisy environments.
*
Receiving party must have same function.
Smart design with easy
operation
The rounded, compact*
design fits comfortably in your palm, and is easy to carry around. The
large keypad makes one-hand operation easy.
*
Size: 54(W) × 139(H) × 38(D) mm ; 2 1/8(W) × 5 15/32(H)
× 1 1/2(D) in
Multi connector for accessories
The 9-pin multi connector,
which use the spring action for close contact, allows you reliable operation
with accessories, such as speaker-microphone or earphone.
Other features
GENERAL | |||||||
Frequency range |
|
||||||
Number of Channels | : Max. 256 Ch/ 16 banks | ||||||
Type of emission | : 16K0F3E (25/30 kHz)
8K50F3E (12.5/15 kHz) 14K0F3E (20 kHz) |
||||||
Channel spacing | : 30/15 kHz (25/12.5 kHz)
20/12.5 kHz |
||||||
Antenna impedance | : 50 Ohm | ||||||
Frequency error | : ±2.5 ppm (EIA)
±1.5 kHz (ETS) |
||||||
PLL channel step | : 5 kHz, 6.25 kHz, 7.5 kHz | ||||||
Power supply requirement | : 7.2 V DC (Icom battery pack) | ||||||
Current drain (at 7.5 V DC; approx) |
|
||||||
Operating temp. range | : -30°C to +60°C;
-22°F to +140°F (EIA)
-25°C to +55°C (ETS) |
||||||
Dimensions
(projections not included) |
: 54(W) × 139(H)
× 38(D) mm
2 1/8(W) × 5 15/32(H) × 1 1/2(D) in |
||||||
Weight (with BP-210) | : 420 g; 14.8 oz | ||||||
TRANSMITTER | |||||||
Modulation system | : Variable reactance frequency modulation | ||||||
Output power (nominal) | : 5.0 W (IC-F30GT/GS)
4.0 W (IC-F40GT/GS) |
||||||
Max. freq. deviation | : ±2.5 kHz, ±5 kHz, ±4 kHz | ||||||
Modulation limiting | : 60 - 100% | ||||||
Audio harmonic distortion | : 3% typ. (1 kHz/40% dev.) | ||||||
Spurious emissions | : -73 dB (EIA)
Less than 0.25 µW (ETS) |
||||||
Adjacent Ch. power | : 60 dB (ETS; 12.5 kHz)
70 dB (ETS; 25/20 kHz) |
||||||
Residual modulation | : 43 dB typ. (ETS; 12.5
kHz)
45 dB typ. (ETS; 25/20 kHz) |
||||||
External MIC connector | : 9-pin multi connector/ 2.2 kOhm | ||||||
RECEIVER | |||||||
Intermediate freq. |
|
||||||
Sensitivity | : 0.25 µV typ. (at
12 dB SINAD)
0.63 µV typ. (at 20 dB SINAD) e.m.f. |
||||||
Squelch sensitivity | : 0.25 µV (at threshold) | ||||||
Adjacent Ch. selectivity | : 63 dB typ. (ETS; 12.5
kHz)
73 dB typ. (ETS; 25 kHz) |
||||||
Spurious response | : 70 dB (EIA)
70 dB (ETS) |
||||||
Intermodulation | : 74 dB typ. (EIA)
70 dB typ. (ETS) |
||||||
Hum and noise ratio | : 40 dB typ. (EIA; 12.5
kHz)
43 dB typ. (EIA; 25/20 kHz) 43 dB typ. (ETS; 12.5 kHz) 45 dB typ. (ETS; 25/20 kHz) |
||||||
Audio output power | : 0.5 W typ. at 5% distortion with an 8 Ohm load | ||||||
External SP connector | : 9-pin multi connector/ 8 Ohm |
Applicable U.S. Military
Specifications
Icom makes rugged products
that meet MIL-STD requirements and strict environmental standards as follows.
Standard | MIL 810C | MIL 810D | MIL 810E | |||
Method | Procedure | Method | Procedure | Method | Procedure | |
Vibration | 514.2 | X | 514.3 | I | 514.4 | I |
Shock | 516.2 | I | 516.3 | I | 516.4 | I |
Measurements made in accordance with EIA-152C/204D, TIA-603 or ETS 300-086. All stated specifications are typical and subject to change without notice or obligation.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S.A. and other countries. SmarTrunk II is a trademark of the SmarTrunk System Corporation. LTR is a registered trademark of the EFJohnson Radio Systems.
BATTERY PACKS AND CASE
|
Approx. output
power and battery life (Tx (Hi): Rx: standby=5:5:90)
|
ANTENNA
ANTENNA ADAPTER CONNECTOR
AD-98FSC
Allows you to connect a
BNC-type antenna. (For maintenace use only)
F40GT 01 | IC-F40GT UHF portable, with DTMF keypad, 400-430 MHz, multi mode (12.5/25 kHz), 4W, 256 channels. Includes 1650 mAh Ni-MH battery (BP-210), clip (MB-74N) & owners manual. Charger not included |
CABANTRDPR50N | 50 feet LMR-240 Antenna Coaxial Cable with Connectors (N to N) |
ANT415F6DIN | 405-440 MHz Omni-Directional Fiberglass Collinear Antenna, 6 dBd, 500W, 7/16 DIN Connector |
SINCGARS_LINK2 | Linking Cable for SINCGARS-mil |
LZA2027 | Internal Tone Termination Panel (IDA) |
Bee-6195B-150 | Bee Electronics 6195B-150 Leather LCD carry case, with Swivel. For Icom F3GS, F3GT, F4GS, F4GT radio(s) |
SPM-2055QD | Medium Duty 2-Wire Surveillance Kit with Low Profile Acoustic Tube Earphone and Built-in Microphone / PTT, with Quick Disconnect Radio Adapter |
ANTC483 | Mounting Clamp Kit for Fiberglass Collinear Antennas |
V2-G4JD221 | OTTO 500 Fire Rated Speaker Microphone with Emergency Button |
M4081LI | 7.4V @ 1900mAh Li-Ion Battery Pack with Belt Clip |