ICOM IC-F320 / IC-F420 Mobile Two-Way Radios
Available as:
F320 53 - 136-155 MHz VHF mobile radio
F320 54 - 146-174 MHz VHF mobile radio
F320S 01 - 136-155 MHz VHF mobile radio
F320S 02 - 146-174 MHz VHF mobile radio
F420 55 - 400-430 MHz UHF mobile radio
F420 56 - 450-470 MHz UHF mobile radio
F420 57 - 470-490 MHz UHF mobile radio
F420 58 - 490-512 MHz UHF mobile radio
F420S 01 - 400-430 MHz UHF mobile radio
F420S 02 - 450-470 MHz UHF mobile radio
F420S 03 - 470-490 MHz UHF mobile radio
F420S 04 - 490-512 MHz UHF mobile radio
Tough
rugged construction
The highly dependable diecast aluminum
chassis and polycarbonate front panel are resistant to impact.
Powerful 45 W of output power
A powerful 45 W (35 W for the IC-F420)
of output power provides reliable long distance communications when you
need it.
SmarTrunk IITM
compatible*
These transceivers allow you to take
advantage of all the benefits of SmarTrunk IITM
trunking systems*. In addition,
CTCSS and DTCS encoder/decoder and DTMF, 2-tone and 5-tone encoder are
standard. And, 2-tone and 5-tone decoder functions are optionally available
to suite a wide variety of signalling requirements.
* Optional
UT-105 SmarTrunk II TM
Logic Board is required; SmarTrunk IITM
is a trademark of SmarTrunk Systems Inc.
Selectable channel spacing
Versions are available that allow
wide/narrow switching independently for each channel.
Programmable key assign function
4 switches provide simple operation
yet their functions can be changed during programming, providing flexibility
to suit your specific needs.
Alphanumeric display
ADDITIONAL
FEATURES
-
Backlit keys help night operation
-
32 channels for 5-tone encoder
-
Emergency call with single and repeat
function
-
8 identities + group code for 5-tone
decode (optional)
-
Selectable digits for 5-tone decode indication
-
Automatic ID transmission linked to PTT
-
51 frequencies for CTCSS (plus 1 programmable)
-
Polarity selectable for DTCS
-
7 autodialing memories for DTMF
-
Up to 5 character channel display
-
Bank separation capability
-
5 scan channel groups
-
2 priority channels
-
Automatic scan start and/or receive mute
when mic. is on hook
-
Automatic priority channel selection
and/or mute release when mic. is off hook
-
Normal and priority scan
-
Scan start at power on
-
CTCSS reverse burst
-
Remote monitoring capability (optional
UT-96 required)
-
Optional PIN code input to prevent operation
by unauthorised persons
-
Programmable minimum level for audio
output
-
Talk around function (temporary simplex
operation on a duplex channel)
-
Time-out timer
-
Time-out ID transmission
-
Penalty timer
-
Transmit lockout (channel busy / repeater
/ reverse repeater)
-
2 selectable 'stun' functions (optional
UT-96 required)
-
Compact body provides easy installation
-
Advanced programming package for IBM(R)
compatible PC's
IBM(R)
is a registered trademark of International Business Machines.
SPECIFICATIONS
GENERAL |
Frequency coverage* |
: IC-F320 136-155 MHz
146-174 MHz
IC-F420 400-430
MHz 450-470 MHz 470-490 MHz 490-512 MHz |
Number of channels |
: 32 (16 ch 2 banks) |
Type of emission |
: 8K50F3E (12.5 kHz/15 kHz; narrow)
16K0F3E (25 kHz/30 kHz; wide) |
PLL channel step |
: 5 kHz, 6.25 kHz and 7.5 kHz |
Frequency stability |
: ±0.0005% |
Operating temp. range |
: -22°F to +140°F |
Power supply voltage |
: 13.6 V DC (negative ground) |
Current drain (approx.) |
: Tx
Rx |
at 45 W
at 35 W
max. audio
standby |
10 A (IC-F320)
8 A (IC-F420)
700 mA
200 mA |
|
Antenna connector |
: SO-239 (50 Ohm) |
Dimensions |
: 5 1/2(W) × 1 9/16(H) ×
6 11/16(D) in |
Weight |
: 2 lb 10 oz |
|
TRANSMITTER |
Output power
(at 13.6 V DC) |
: 45 W (IC-F320)
35 W (IC-F420) |
Modulation system |
: Variable reactance freq. mod. |
Max. freq. deviation |
: ±5.0 kHz (wide) ±2.5
kHz (narrow) |
Spurious emissions |
: 70 dB |
Adjacent Ch. power |
: 70 dB (wide) 60 dB (narrow) |
Mic. connector |
: 8-pin modular (600 Ohm) |
|
RECEIVER |
Intermediate freq. |
: 1st 31.05 MHz (IC-F320)
46.35 MHz (IC-F420)
2nd 450 kHz |
Sensitivity
(at 12 dB SINAD) |
: 0.22 µV (typ.; IC-F320)
0.25 µV (typ.; IC-F420) |
Squelch sensitivity |
: 0.22 µV (typ.; IC-F320)
0.25 µV (typ.; IC-F420) |
Adj. Ch. selectivity |
: 70 dB (wide) 60 dB (narrow) |
Spurious response |
: 70 dB |
Intermodulation |
: 65 dB |
Audio output power |
: 3 W typical at 5% distortion with
a 4 Ohm load |
Ext. SP connector |
: 2-conductor 3.5 (d) mm (1/8")/4 Ohm |
* Varies according
to versions.
Applicable U.S. Military Specifications
Icom makes rugged products that meet
MIL-STD requirements and strict environmental standards as follows.
Standard |
MIL
810C |
MIL
810D |
MIL
810E |
Method |
Procedure |
Method |
Procedure |
Method |
Procedure |
Vibration |
514.2 |
X |
514.3 |
I |
514.4 |
I |
Shock |
516.2 |
I |
516.3 |
I |
516.4 |
I |
Supplied Accessories
-
Hand mic.*
-
DC power cable
-
Fuses
-
Mounting bracket kit
-
Key assign stickers
* depending
on version
Measurement made in accordance with
EIA/TIA-152C/204D. All stated specifications are subject to change without
notice or obligation.
Accessories
-
UT-96 5-TONE UNIT
Provides the transceiver with 2-tone
and 5-tone decoder capabilities
-
UT-105 SmarTrunk II TM
Logic Board*
Provides SmarTrunk II TM
capabilities.
* SmarTrunk
II TM is a trademark
of SmarTrunk Systems Inc.
-
UT-109/UT-110 VOICE SCRAMBLER
UNITS
Provides operating privacy. Ask your
local dealer for details about usable version, etc.
UT-109: Non rolling type, UT-110:
Rolling type
-
SP-5/SP-10/SP-22 EXTERNAL SPEAKERS
Input impedance: 4 Ohm; Max. input power: 5 W
-
OPC-617 ACC CABLE
For external terminal connection.
-
HM-100TN DTMF MICROPHONE
-
UT-111 TRUNKING UNIT
Provides trunking capabilities for
IC-F420. Ask your local dealer for details about usage.
|