ICOM IC-F1020 / IC-F2020 VHF and UHF Transceivers
Rugged
construction
The diecast aluminum chassis and
polycarbonate front panel are resistant to impact.
45 W*
of stable output power
The one-piece aluminum chassis and
heat sink provide effective heat dissipation, even at high duty cycles.
* 45 W for
the IC-F1020 (VHF) and 35 W for the IC-F2020 (UHF).
Detachable front panel*
A detachable front panel provides
numerous mounting possibilities and is simple to install in almost any
vehicle.
* Optional
remote kit and cable lengths available.
Programmable assign function
Six switches provide simple operation
yet their functions can be changed during programming, providing flexibility
to suit your specific needs. (Limited front panel programming available.)
9600 baud data compatible
CTCSS and DTCSS are standard
Large, alphanumeric display
32 channels standard; up to 160
optional
ADDITIONAL
FEATURES
-
Selectable channel spacing (channel independent)
-
Memo banks
-
Emergency call (DTMF code) with single
or repeat function
-
Tones + group code channels for 2-tone
decode (optional)
-
Automatic DTMF transmission linked to
PTT
-
Standard CTCSS with 51 frequencies (plus
1 programmable)
-
Standard DTCS with selectable polarity
-
7 DTMF channels for auto-dialing
-
Up to 8 alphanumeric characters for memory
name display
-
5 scan channel groups
-
2 priority channels
-
Scan start and/or tone squelch as the
microphone on hook function
-
Priority channel selection and/or receive
monitor as the microphone off hook function
-
Normal scan and priority scan
-
Power ON scan start
-
Reverse burst equivalent
-
Transpond capability (optional 2-tone
decoder unit necessary)
-
Programmable password security
-
Programmable minimum level for audio
volume
-
Talk around function
-
Time-out timer with penalty time
-
Transmit lockout (CTCSS/channel busy)
-
2 selectable 'stun' functions (optional
2-tone decoder unit necessary)
-
External I/O terminal socket (optional
OPC-617 required) for PA, horn honk, dimmer, 9600 baud packet and PTT
-
Advanced programming package for IBM(R)
PC or compatible
IBM(R)
is a registered trademark of International Business Machines.
SPECIFICATIONS
GENERAL |
Frequency coverage (Unit;
MHz) |
: IC-F1020 136-155 146-174
IC-F2020 400-430
450-470 470-490 490-512 |
Mode |
: 16K0F3E (wide)
8K50F3E (narrow) |
Number of channels |
: 32 (standard), 160 (optional) |
Channel spacing /font> |
: 25 kHz, 30 kHz or 12.5 kHz |
PLL channel step |
: 5 kHz, 6.25 kHz and 7.5 kHz* |
Power supply requirement |
: 13.6 V DC ±15% (negative
ground) |
Current drain (at 13.6
V DC; typical) |
: High
Squelched
Max. audio |
15 A (IC-F1020)
11 A (IC-F2020)
700 mA
1.2 A |
|
Usable temp. range |
: -30°C to +60°C; -22°F
to +140°F |
Frequency stability |
: ±5 ppm |
Dimensions (proj. not
included) |
: 150(W) × 50(H) × 180(D)
mm
5 29/32 × 1 31/32(H)
× 7 3/32(D) in |
Weight |
: 1.5 kg; 3 lb 5 oz |
|
TRANSMITTER |
Output power |
: IC-F1020 High 45 W
Low 4.5 W
IC-F2020 High
35 W Low 2 W |
Max. frequency deviation |
: ±5.0 kHz (wide)
±2.5 kHz (narrow) |
Modulation distortion |
: 5% |
Spurious emissions |
: 70 dB min. |
Harmonic emissions |
: 70 dB min. |
|
RECEIVER |
Sensitivity for 12 dB
SINAD (typical) |
: IC-F1020 0.21 µV
IC-F2020 0.25
µV |
Squelch sensitivity |
: IC-F1020 0.21 µV
IC-F2020 0.25
µV |
Adj. channel selectivity |
: 75 dB typ. (wide)
65 dB typ. (narrow) |
Intermodulation rejection |
: 65 dB |
Spurious response rejection |
: 70 dB min. |
Audio output power |
: 4 W typ. at 10% distortion with
a 4 Ohm load |
* Wide/Narrow
switchable versions only
Applicable U.S. Military Specifications
Icom makes rugged products that meet
MIL-STD requirements and strict environmental standards as follows.
Standard |
MIL
810C |
MIL
810D |
MIL
810E |
Method |
Procedure |
Method |
Procedure |
Method |
Procedure |
Vibration |
514.2 |
X |
514.3 |
I |
514.4 |
I |
Shock |
516.2 |
I |
516.3 |
I |
516.4 |
IV |
Measurements made in accordance
with EIA/TIA-240D, EIA/TIA-316C.
All stated specifications are
subject to change without notice or obligation.
Accessories
-
EX-1761 MEMORY EXPANSION UNIT
Expands memory channels to 160 from 32.
-
OPC-617 ACC CABLE
For external terminal connection.
-
RMK-1 SEPARATION KIT
For front panel detachment installation__use
with one of the following cables: OPC-607 (3 m), OPC-608 (8 m), OPC-609
(1.9 m) or OPC-726 (5 m).
-
SP-5/SP-10/SP-22 EXTERNAL SPEAKERS
Input impedance: 4 Ohm; Max. input power: 5 W.
-
UT-80 2-TONE UNIT
Provides 2-tone decoder capability.
-
UT-96 5-TONE UNIT
Provides 5-tone decoder capabilities
as well as 2-tone decoder capabilities via PC programming.
-
UT-105 SmarTrunk IITM
Logic Board*
Provides SmarTrunk IITM
capabilities.
* SmarTrunk
IITM is a trademark
of SmarTrunk System Inc.
-
UT-109/UT-110 VOICE SCRAMBLER
UNITS
Provides operating security. Ask
your local dealer for details about usable version, etc.
UT-109: Non-rolling type/UT-110:
Rolling type
|