Icom F1020 52 B
Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G More...
Meets U.S. Department of Defense environmental standard MIL-STD-810 C, D, E, F, G More...
| GENERAL | |||
| Frequency coverage (Unit; MHz) | : IC-F1020 136-155 146-174
IC-F2020 400-430 450-470 470-490 490-512 |
||
| Mode | : 16K0F3E (wide)
8K50F3E (narrow) |
||
| Number of channels | : 32 (standard), 160 (optional) | ||
| Channel spacing /font> | : 25 kHz, 30 kHz or 12.5 kHz | ||
| PLL channel step | : 5 kHz, 6.25 kHz and 7.5 kHz* | ||
| Power supply requirement | : 13.6 V DC ±15% (negative ground) | ||
| Current drain (at 13.6 V DC; typical) |
|
||
| Usable temp. range | : -30°C to +60°C; -22°F to +140°F | ||
| Frequency stability | : ±5 ppm | ||
| Dimensions (proj. not included) | : 150(W) × 50(H) × 180(D)
mm
5 29/32 × 1 31/32(H) × 7 3/32(D) in |
||
| Weight | : 1.5 kg; 3 lb 5 oz | ||
| TRANSMITTER | |||
| Output power | : IC-F1020 High 45 W
Low 4.5 W
IC-F2020 High 35 W Low 2 W |
||
| Max. frequency deviation | : ±5.0 kHz (wide)
±2.5 kHz (narrow) |
||
| Modulation distortion | : 5% | ||
| Spurious emissions | : 70 dB min. | ||
| Harmonic emissions | : 70 dB min. | ||
| RECEIVER | |||
| Sensitivity for 12 dB SINAD (typical) | : IC-F1020 0.21 µV
IC-F2020 0.25 µV |
||
| Squelch sensitivity | : IC-F1020 0.21 µV
IC-F2020 0.25 µV |
||
| Adj. channel selectivity | : 75 dB typ. (wide)
65 dB typ. (narrow) |
||
| Intermodulation rejection | : 65 dB | ||
| Spurious response rejection | : 70 dB min. | ||
| Audio output power | : 4 W typ. at 10% distortion with a 4 Ohm load | ||
* Wide/Narrow switchable versions only
Applicable U.S. Military Specifications
Icom makes rugged products that meet
MIL-STD requirements and strict environmental standards as follows.
| Standard | MIL 810C | MIL 810D | MIL 810E | |||
| Method | Procedure | Method | Procedure | Method | Procedure | |
| Vibration | 514.2 | X | 514.3 | I | 514.4 | I |
| Shock | 516.2 | I | 516.3 | I | 516.4 | IV |
Measurements made in accordance
with EIA/TIA-240D, EIA/TIA-316C.
All stated specifications are
subject to change without notice or obligation.




Icom America Inc. designs, engineers, and manufactures wireless radio communications equipment and products for marine, avionics, land mobile, and wide-band receiver industries. The company offers amateur radios, including base stations, mobile, handheld, D-Star, and receivers; avionics, including handheld mobile and panel mount; mobiles, including IDAS, P25, network/RoIP, and data/HF; and handheld devices for marinas, large yachts, and various commercial vessels. It also provides custom-build and off-the-shelf radio systems. The company serves federal, state, and local government agencies.
| F1020 52 B | F1020 VHF Data / Remote mount mobile radio, 146-174 MHz, 45W, 12.5/25 kHz, 32 channels with DC power cable, hand mic, fuses, mounting bracket kit, key assign stickers, and operators manual. Radio installed in ASTPS11IF base station power supply |
| FA-B02AR | Standard Air Band Antenna |
| 9BBHH | KENWOOD TK-690, TK-790, TK-890 High Powered, Dual Band, Dual Head Remote Mount Configuration Set |
| L-1798 | TK-D240V/340U Programming (with basic TX/RX check) |
| F4TR 01 DTC | IC-F4TR UHF Trunked radio, with DTMF Keypad, 450-490 MHz, 4W, 12.5/25 kHz, 250 conv. ch, 50 systems / 20 ch, with 110V Drop-In Trickle Charger (BC-133 & BC-122A). Includes antenna, 1050 mAh Ni-Cd battery (BP-196), plastic belt clip, manual |
| B707 | Connector Body O-Ring for 1/2" Standard Connectors |
| TK-880HK3 | TK-880 UHF Trunking/Conventional Mobile Radio, 400-430 MHz 40W, LTR-32 Systems, CONV-250 CH., Includes: KMC-27B Mic., DC Cable, Mounting bracket |
| SRM-25M-AP | 13.8 Volt @ 25.0 Amp Rackmount Switching Power Supply with V and A Indicators, Anderson PowerPole Plugs |
| MC-EM00 | Earmuff Headset Cable with X00 Connector |
| 3112B | Nylon Carry Case with Belt Loop |
