American Communication Systems
Home  >>  Multiplier MX4487LIPIC
My Cart Cart    
My Account My Account


Multiplier MX4487LIPIC

7.4V @ 4900mAh LiPo PolyMax HPC Smart Battery Pack
Japanese cells. Works with MOTOROLA APX6000, APX6000XE, APX7000, APX7000XE, APX8000, APX8000XE radios
Replaces OEM part number: PMNN4487
Customer Rating:  
/
Vote!
Item SKU Number:  522056
Original Manufacturer: Motorola (also Nextel, iDen)
FCA point / Shipped from:  USA 
 Item Details:


Multiplier MX4487LIPIC Smart Battery

Battery Characteristics:

Replaces OEM Battery: PMNN4487A
Compatible Chargers: Endura, Logic, or Motorola IMPRES 1 / 2 chargers
Voltage: 7.4V
Capacity: 4900 mAh, 36.3 Wh
Chemistry: LiPo
Cell Type: PolyMax HPC
Charge Cycle: >500
Thermal Protection: Yes
Housing Material: ABS
Weight: 0.54 lbs / 244.9 g
Dimensions: 5.39" x 2.34" x 1.57"
136.8 x 59.4 x 39.9 mm
 Additional Information:


Compatible with MOTOROLA two-way radios:

APX 5000
APX 6000
APX 6000XE
APX 7000
APX 7000XE
APX 8000
APX 8000XE



NEVER solder the battery terminals, or NEVER modify the battery pack. This may cause heat generation, and the battery may burst, emit smoke or catch fire.

NEVER leave battery pack in places with temperatures above +60°C (+140°F). High temperature buildup in the battery, such as could occur near fires or stoves, inside a sun-heated vehicle, or in direct sunlight for long periods of time may cause the battery to rupture or catch fire. Excessive temperatures may also degrade battery’s performance or shorten battery life.

NEVER strike or otherwise impact the battery. Do not use the battery if it has been severely impacted or dropped, or if the battery has been subjected to heavy pressure. Battery damage may not be visible on the outside of the case. Even if the surface of the battery does not show cracks or any other damage, the cells inside the battery may rupture or catch fire.

NEVER expose the battery to rain, snow, seawater, or any other liquids. Do not charge or use a wet battery. If the battery gets wet, be sure to wipe it dry before using.

NEVER place or leave battery packs near fire. Fire or heat may cause them to rupture or explode. Dispose of used battery packs in accordance with local regulations.

NEVER use the battery with a transceiver for which it is not specified. Never use a battery with any other equipment, or for any purpose that is not specified in an instruction manual.

NEVER let fluid from inside the battery get in your eyes. If it does, blindness can result. Rinse your eyes with clean water, without rubbing them, and immediately go to a doctor.

NEVER put the battery in a microwave oven, high-pressure container, or in an induction heating cooker. This could cause a fire, overheating, or cause the battery to rupture.

NEVER use the battery if it emits an abnormal odor, heats up, or is discolored or deformed. If any of these conditions occur, contact your dealer or distributor.


 Similar or Related Products:

 These models may be compatible with your equipment:

PM4486LIPIC
PM4486LIPIC
Power Products


7.4V @ 3400mAh LiPo PolyMax HPC Smart Battery
PM4487LIPIC
PM4487LIPIC
Power Products


7.4V @ 5100mAh LiPo PolyMax HPC Smart Battery
LE4547LIIS
LE4547LIIS
Power Products


7.4V @ 3100mAh Li-Ion Intrinsically Safe Battery
BP7034PL
BP7034PL
Power Products


9.0V / 4500mAh Li-MnO2 Non-Rechargeable Battery, Black Color
M7034PLPU
M7034PLPU
Multiplier


9.0V @ 4500mAh Li-MnO2 Non-Rechargeable Battery, Purple Color
M7034PL
M7034PL
Multiplier


9.0V / 4500mAh Li-MnO2 Non-Rechargeable Battery, Black Color





 Last Viewed Items:

MX4487LIPIC 7.4V @ 4900mAh LiPo PolyMax HPC Smart Battery Pack
ANT385F6-DIN 370-401 MHz Omni-Directional Fiberglass Collinear Antenna, 6 dBd, 500W, 7/16 DIN-Female Connector
EC4HF-762-DMDM 1/2" Hi-Flex Jumper Cable 25', 7/16 Din Male to 7/16 Din Male, 1 ea
3270B-350 Nylon Carry Case with Swivel
SPM-4100L PRYME SPM-4100 Multi-Feature Speaker Microphone. Operates with MIDLAND and VERTEX portable radios (See list of compatible products).
V4-10393 Commercial Lightweight Padded Headset with Single Speaker, with Standard PTT
TPCP-7526 Combline Preselector
1640A Isolator “Screw On” Termination, 0 – 1000 MHz, 75W
L-5002 NX-5200 / NX-5300 / NX-5400 Programming (with basic TX/RX check)
P-CON-TC Replacement TC Twist Connect (TC) Acoustic Tube Connector



Share this Page