EMR 25132-1/P-5
Description: Receiver Multicoupler,
300 - 512 MHz
Manufacturer: EMR Corporation
Part
Number: 25132-1/P-5
Frequency
Band, MHz: 300 -
512
# of Channels: 25
- 32
Pass Band,
MHz: 3 – 10
# of Resonators: 5
Rx/Rx
Isolation, dB: 23+
System
Voltage, VAC: 115
Amplifier
Gain, dB: +30
Amplifier
Type: Bipolar
Amplifier
Noise Figure, dB: 3.0
Amplifier
3rd Order IP, dBm: +42
Amplifier 1
dB Comp, dBm: +21
Amplifier
Bias Voltage, VAC: 13.6
Amplifier
Current Draw, mA: 200
Nominal
Impedance, ohm: 50
Max. VSWR @
Resonance: 1.25:1
Dimensions,
Inches (H x W x D): 12 1/4 x 19
x 10
Connectors:
Input / Output: N / BNC
Shipping
Weight, lbs: 23
Additional
Information: N/A
| 25132-1/P-5 | Receiver Multicoupler, 300 - 512 MHz |
| V4-SC2KA3B | Commercial Skull Microphone with Earphone, Headband, In-line PTT with 2.5mm Jack for Optional Remote PTT |
| L-909 | Install ST-865KW4 SmarTrunk II Logic Board and ST-909 cable |
| SNP-1W-43-BF | 1-Wire Braided Fiber Surveillance Lapel Microphone |
| 6454/SBD | Band Pass Cavity Resonator, 190 – 240 MHz, 150 W |
| L-910 | Install firmware 094F (90-series mobile * and # DTMF without PTT) |
| BKR9000-T2.5YS | BKR 9000 Tier 2.5 Portable Handheld Radio, All-Band Capable Hardware, 6 Watt RF Power, 5000 Channels, Front and Top Display, Partial Keypad, Wi-Fi, Bluetooth, GPS, DES, ADP, Yellow Housing, Channel Stop |
| 07-110-9490 | Cadex charger battery adapter. To be used with model SCP-07LBPL Li 3.6V 1375 mah battery, made for Sanyo SCP-5300 |
| Otto V4-BA2CM1 | BREEZE Behind-the-head Headset, Single Speaker, Left Boom Microphone and Mini PTT, Multi Pin Overmolded Connector |
| 2096B-C | Leather Carry Case with Clip |
