Telewave Inc TWR16-50-500

Telewave Inc > Accessories other

50-512 MHz 16 Channel Receiver Distribution Panel, N-Female Connector

Customer Rating:

Item SKU Number: 480265

Made in: USA

FCA point / Shipped from: USA

Download Free Materials:

Telewave-TWR8-TWR16-TWR24-receiver-distribution-panels.pdf (87.31 KB)

Item Details:

Telewave TWR8, TWR16, TWR24 Series Compact Receiver Panels

Telewave Receiver Distribution Panels are designed to efficiently feed multiple receivers from a single antenna, reducing costs and tower loading while maintaining consistent signal quality, output isolation, and enhanced output levels.

Each panel typically includes a power supply, an inline low-noise preamplifier, and one or two 8-way splitters integrated into a standard 19” panel. The preamplifier provides up to +18 dB of system gain to compensate for splitting and cable losses.

Telewave receiver panels are fully shielded and offer sufficient bandwidth to cover entire commercial or Public Safety bands. Standard configurations include one input, 8 or 16 outputs, and a -20 dB sample port on a compact 7" x 19" panel. For the 700/800 MHz band, a 24-channel model is also available. For installations with limited rack space, the Telewave 1R and 2R series provide compact solutions, offering 8 or 16 channels in 1 rack unit (1.75" height) or up to 32 channels on a 3.5" panel.

Additional panels can be seamlessly added to expand the number of available outputs without requiring additional parts or tuning. Telewave panels are designed to integrate easily with existing systems. However, successful multicoupling often requires filtering between the receiver panel and the antenna. Telewave offers a wide range of high-quality preselector systems for both transmitters and receivers to meet these needs.

These panels deliver 8 or 16 matched 50-ohm outputs from a single input, with a typical isolation of 25 dB between ports. The antenna port is tuned with a matching network to ensure a balanced input, and a -20 dB sample port is included for external signal analyzers.

Telewave receiver panels can operate on +12 to +24 VDC or standard 120/220-240 VAC power supplies. Additional voltage options are available upon request. For uninterrupted operation during power outages, the DC input can be paired with a battery backup (note: charging output is not included). The tuning range and bandwidth depend on the frequency band and system components.

For custom requirements or to ensure optimal system performance, Telewave’s sales engineers are available to provide guidance and tailored solutions.

List of Models:

Model	Frequency	Ports	Bandwidth	Gain
TWR8-030	30-88 MHz	8	58 MHz	0-18 dB
TWR8-050	50-512 MHz	8	400 MHz	0-18 dB
TWR8-150	132-174 MHz	8	42 MHz	0-18 dB
TWR8-250	216-250 MHz	8	34 MHz	0-18 dB
TWR8-350	300-400 MHz	8	40 MHz	0-18 dB
TWR8-450	400-512 MHz	8	40 MHz	0-18 dB
TWR8-760	763-824 MHz	8	40 MHz	0-12 dB
TWR8-860	806-960 MHz	8	40 MHz	0-12 dB
TWR16-030	30-88 MHz	16	58 MHz	0-15 dB
TWR16-050	50-512 MHz	16	400 MHz	0-15 dB
TWR16-150	132-174 MHz	16	42 MHz	0-15 dB
TWR16-250	216-250 MHz	16	34 MHz	0-15 dB
TWR16-350	300-400 MHz	16	40 MHz	0-15 dB
TWR16-450	400-512 MHz	16	40 MHz	0-15 dB
TWR16-760	763-824 MHz	16	40 MHz	0-8 dB
TWR16-860	806-960 MHz	16	40 MHz	0-8 dB
TWR24-760	763-824 MHz	24	40 MHz	0-6 dB
TWR24-860	806-960 MHz	24	40 MHz	0-6 dB

Specifications:

Impedance / VSWR (typ):	50 ohms / 1.3:1
Isolation port to port (min / typ.):	30-174 MHz: 20 dB / 25 dB 216-960 MHz: 25 dB / 30 dB
Noise figure (max):	2.5 dB
Third-order intercept (typ):	+36 dBm
Intermodulation (typ):	-130 dB for -30 dBm input
Sample port:	-20 dB
Temperature range:	-40°C to +60°C
Power requirements:	AC: 120 VAC (std.) 220/240 VAC (opt.) DC: +11.5 to +15 VDC (regulated output), +12 to +24 VDC (direct to preamp)
Connectors:	Input - N Female Output - N or BNC Female (opt.)
Dimensions (HWD):	7 in x 19 in x 3 in 17.8 cm x 48.3 cm x 7.6 cm
Weight:	8 ch: 5.5 lb / 2.5 kg 16 ch: 6.0 lb / 2.7 kg 24ch: 6.5 lb / 2.9 kg

Notes:

1. All unused ports should be terminated with a 50-ohm load. The TWL-01 RF terminator is recommended for this purpose.
2. Panel gain is measured from the input port to any output port and is factory-adjusted based on specific system requirements. If not specified, the standard gain is set to 6 dB.
3. Tuning range and bandwidth depend on the frequency band and system components.
4. Exact frequencies and system gain must be provided when placing an order.

Note:

For detailed specifications on this item, download Telewave Large Product Brochure (the link is below). Bulky items may incur higher shipping charges, please inquire before ordering.

Manufacturer's Catalogs and Guides:

These files contain information about the available products from the manufacturer. If you need something that is not on our website, please contact us. We will help you purchase the desired product at a low price.

Telewave Large Product Brochure

An illustrated catalog featuring specifications and graphs of RF products.

Telewave All Products List

Browse a list of all the RF products that are available in 2023.

Telewave Inc. designs and manufactures high quality RF system products. It serves wireless system operators, public safety providers, local and state governments, and federal agencies in the United States and internationally. The company was founded in 1972 and is based in San Jose, California. Telewave strives to be the premier supplier of seamless interoperable communication systems that provide security and reliability in mission critical eco-systems for both commercial and military applications worldwide. Telewave products are used by more than 7,500 equipment and network manufacturers and government agencies throughout the world.