Telewave ANT750D7-12
DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd
The Telewave
ANT750D7-12 antenna consists of single, dual, and 4-element dipole array
antennas with
a precision phasing harness for optimum performance. The
antenna horizontal pattern is field adjustable,
for any current or future coverage requirements. The
wide bandwidth and high efficiency of these antennas
make them ideal for many applications, including trunking, business, public safety, and government communication..
Each dipole element is
constructed with 6061-T6 aluminum, and welded at the base for maximum strength.
Each antenna is also
completely sealed with our high-tech Txylan™ coating,
which resists water and ice buildup,
and provides exceptional protection from corrosive
gases, UV radiation, salt spray, acid rain and windblown abrasives.
The phasing harness is fully
sealed by Telewave’s Millenium
Seal™ technology.
All components are at DC
ground potential for lightning protection. Each dipole element includes
a heavy-duty custom clamp set for mounting to a
1.5”-2.5” diameter galvanized steel support pipe or tower leg.
Up to 15 degrees of
electrical uptilt or downtilt may be specified for D3
or D6-9 models.
Desired tilt angle must be included
on the order, and consultation with our antenna engineering staff is requested.
Installed
Height 91”. Standard connector is
N-Male on a pigtail (8 bay arrays and ANT900Dxx
terminate with N-Female or
DIN-F on power divider). 7-16 DIN available (additional cost).
All dipoles and arrays are
field-configurable and UPS shippable, and include clamps for mounting to
an existing mast or other support. 2 and 4 bay arrays
can be ordered with up to 15 degrees of electrical uptilt or downtilt.
COMMON SPECIFICATIONS
Frequency (continuous), MHz: 700
- 825
Power rating (typ.), W: 500
Impedance, ohm: 50
VSWR: 1.5:1
or less
Pattern: Adjustable:
Offset circular, cardioid, or bidirectional
Lightning protection: DC
Ground
Termination: N-Male
or 7-16 DIN (opt.) on harness feed cable
Wind rating, MPH: 200
(with 0.5” ice), MPH: 175
MODEL SPECIFICATIONS
Gain (dependent on pattern), dBd: 7
– 12
Vertical beamwidth (3/8 wl.): 33°
Dimensions (H x D) max, in.: 19
x 7
Weight (antenna + clamps), lb.: 14
Maximum exposed area, ft.І: 0.42
Lateral thrust at 100 MPH, lb.: 17
ANT750D7-12 | ANT750D7-12 BASE STATION ANTENNA 8 BAY(S), 700-825 MHz |
SMU250KTST | LTR/Conventional Mobile Radio UHF, 450 - 494 MHz, 25 watts, 50 Systems/100 Talk Groups. Includes AMX120A Power Cable, AMX100A Microphone and Mounting Hardware |
6755B-150 | Leather Carry Case with Swivel |
B2K3/Q5BM | Antenna UHF, 406 - 512 MHz, N-Male |
BC-156 04 | 220V Desktop Charger |
2379B | Nylon Carry Case with Belt Loop |
07-110-3982 | Cadex charger battery adapter. To be used with model BATT SU NiCd 12V 1400 mah battery, made for Theimeg |
SERMANRM | Service Manual |
SBUP2P2H | RELM/BK UHF Base Station, 450-485 MHz, 50 Watts, N-Type Female RF Output Antenna Connector, 12VDC Rackmount Power |
2421B-350 | Nylon Carry Case with Swivel |