Telewave Inc ANT550D3
ANT550D3 BASE STATION ANTENNA 2 BAY(S), 500-600 MHz
DIPOLE ARRAY(S) 500 WATTS. ADJUSTABLE PATTERN(S).
Telewave-antenna-connection-weatherproofing.pdf (177.98 KB)Telewave ANT550D3
DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd
The Telewave
ANT550D3 antenna consists of single, dual, and 4-element dipole array antennas
with
a precision phasing harness for optimum performance. The
antenna horizontal pattern is field adjustable,
for any current or future coverage requirements. The
wide bandwidth and high efficiency of these antennas
make them ideal for many applications, including trunking, business, public safety, and government
communication..
Each dipole element is
constructed with 6061-T6 aluminum, and welded at the base for maximum strength.
Each antenna is also
completely sealed with our high-tech Txylan™ coating,
which resists water and ice buildup,
and provides exceptional protection from corrosive
gases, UV radiation, salt spray, acid rain and windblown abrasives.
The phasing harness is fully
sealed by Telewave’s Millenium
Seal™ technology.
All components are at DC
ground potential for lightning protection. Each dipole element includes
a heavy-duty custom clamp set for mounting to a
1.5”-2.5” diameter galvanized steel support pipe or tower leg.
Up to 15 degrees of
electrical uptilt or downtilt may be specified for D3
or D6-9 models.
Desired tilt angle must be
included on the order, and consultation with our antenna engineering staff is
requested.
Installed
Height 26”. Standard connector is
N-Male on a pigtail. 7-16 DIN available (additional cost).
All dipoles and arrays are
field-configurable and UPS shippable, and include clamps for mounting to
an existing mast or other support. 2 and 4 bay arrays
can be ordered with up to 15 degrees of electrical uptilt or downtilt.
COMMON SPECIFICATIONS
Frequency (continuous), MHz: 500
- 600
Power rating (typ.), W: 500
Impedance, ohm: 50
VSWR: 1.5:1
or less
Pattern: Adjustable:
Offset circular, cardioid, or bidirectional
Lightning protection: DC
Ground
Termination: N-Male
or 7-16 DIN (opt.) on harness feed cable
Wind rating, MPH: 175
(with 0.5” ice), MPH: 150
MODEL SPECIFICATIONS
Gain (dependent on pattern), dBd: 3
– 6
Vertical beamwidth (3/8 wl.): 33°
Dimensions (H x D) max, in.: 31
x 11
Weight (antenna + clamps), lb.: 14
Maximum exposed area, ft.І: 0.56
Lateral thrust at 100 MPH, lb.: 22
Telewave Inc. designs and manufactures high quality RF system products. It serves wireless system operators, public safety providers, local and state governments, and federal agencies in the United States and internationally. The company was founded in 1972 and is based in San Jose, California. Telewave strives to be the premier supplier of seamless interoperable communication systems that provide security and reliability in mission critical eco-systems for both commercial and military applications worldwide. Telewave products are used by more than 7,500 equipment and network manufacturers and government agencies throughout the world.
| ANT550D3 | ANT550D3 BASE STATION ANTENNA 2 BAY(S), 500-600 MHz |
| 7214B-C | Leather Carry Case with Clip |
| HSS-1 | Hot Standby Switch |
| M191202H | 7.5V @ 2700mAh NiMH High Capacity Battery Pack |
| SPM-2006QD | PRYME SPM-2000 Medium Duty 2-Wire Surveillance Kit with Acoustic Tube Earphone and Built-in Microphone/PTT, Quick Disconnect feature. For EF JOHNSON radios. |
| KSGDX62001 | VHF Duplexer, 148-160 MHz, 6 Cavities, 4.5 MHz Minimum Spacing, N-F |
| EC4-549-NFO | 1/2" Standard Jumper Cable 18 ft., N Female to Open, 1 ea |
| SPM-3101QD | Pryme SPM-3100 Heavy Duty Speaker Microphone, Quick Disconnect feature. For KENWOOD and RELM/BK radios. |
| BC-205 12 | 110VAC Rapid Charger (2.5 hours) |
| 2821B-C | Nylon Carry Case with Clip |
Facebook
YoutubeCopyright © 1991-2025 American Communication Systems, Inc. Patent and other rights reserved. |
