Telewave Inc ANT940Y10-WR
ANT940Y10-WR BASE STATION DIRECTION YAGI ANTENNA, 900-960 MHz, 500 WATTS
UPS shippable
Telewave_ANT940Y10-WR_antenna.pdf (252.93 KB) Telewave-antenna-connection-weatherproofing.pdf (177.98 KB)Telewave ANT940Y10-WR
YAGI ANTENNA 10 dBd
The Telewave
ANT940Y10-WR is a high performance directional antenna, designed especially for
point to point as well as point to multipoint
applications. These antennas produce 10 dBd forward gain with an excellent
front-to-back ratio. Solid aluminum elements with 360° welds
prevent intermodulation and provide exceptional strength.
Each antenna is completely
protected with our high-tech Txylan™ coating, which
provides icing resistance and environmental
protection from corrosive gases, ultraviolet radiation, salt
spray, acid rain and wind blown abrasives such as desert sand.
The feed line is protected
within the boom, and the radiating element is completely sealed against ice and
other environmental
hazards with a tough, RF-transparent radome.
The ANT940Y10-WR includes a
welded vertical plate and mast clamp set. A horizontal plate is optional.
The clamp set secures the antenna
to a vertical mast or tower support from 1.0” - 2.5” O.D.
For installations on angled
supports, the “U” mount allows mounting to virtually all angled supports up to
3.5” O.D.
Yagi antennas ship standard with a vertical mounting
plate. Horizontal welded plate (special order).
Universal mount (add $85.00).
For horizontal mounting of a standard yagi, use
ANTM400H or 940H.
All models are UPS shippable.
Length 23”. Standard connector
N-Female. 7-16 DIN available (additional cost).
SPECIFICATIONS
Frequency (continuous), MHz: 900
– 960
Gain (typ.), dBd: 10
Power rating (typ.), W: 500
Impedance / VSWR, ohm: 50
/ 1.5:1 (max)
Front to back ratio (min), db: 20
Beamwidth V / H: 49°
/ 47°
Pattern / Polarization: Directional
/ Vertical
Termination: N
Female or 7-16 DIN (opt)
Elements: 7
Dimensions (L x H), in.: 24
x 11
Antenna weight, lb.: 3
Shipping weight, lb.: 7
Wind rating / with 0.5” ice, MPH: 200
/ 165
Exposed area (flat plate equiv.), ft.І 0.25
Lateral thrust at 100 MPH, lb.: 7.25
(40 psf - flat plate
equiv.)
Telewave Inc. designs and manufactures high quality RF system products. It serves wireless system operators, public safety providers, local and state governments, and federal agencies in the United States and internationally. The company was founded in 1972 and is based in San Jose, California. Telewave strives to be the premier supplier of seamless interoperable communication systems that provide security and reliability in mission critical eco-systems for both commercial and military applications worldwide. Telewave products are used by more than 7,500 equipment and network manufacturers and government agencies throughout the world.
| ANT940Y10-WR | ANT940Y10-WR BASE STATION DIRECTION YAGI ANTENNA, 900-960 MHz, 500 WATTS |
| C101084 | Thumbscrew, EDACS 300P |
| SPM-4133 | PRYME SPM-4100 Multi-Feature Speaker Microphone. Operates with MOTOROLA portable radios (See list of compatible products). |
| F4161T 50 RC | ICOM IC-F4161T UHF Conventional / LTR Portable Radio, 450 - 512 MHz, 4W, 512 Channels, LCD Display, with Keypad, Intrinsically Safe Configuration |
| SPM-2100-H3 | TROOPER Heavy Duty Remote Speaker Microphone, Replaceable Cable, 3.5mm Earphone Jack |
| W7440/3 | Single Isolator, 146 - 300 MHz, 50 Watt Load |
| KSGA304S | 40W Continuous Duty RF Amplifier for Repeater Station. Amplifier occupies 4 RU and includes a 40A, 13.8V DC power supply. Includes factory tuning, wiring and RF cables |
| EC1-V2-MT11A | Endura Desktop Charger with Replaceable Pod |
| SPM-1504QD | Pryme SPM-1500 GLADIATOR (TM) Tactical Heavy Duty Throat Microphone with Clear Acoustic Tube Style Surveillance Earphone, Quick Disconnect feature. For MAXON radios |
| HLP-SNL-03 | Lightweight Padded Headset with Single Speaker, Leatherette Ear Pad and Flexible Boom Electret Microphone |
Facebook
YoutubeCopyright © 1991-2026 American Communication Systems, Inc. Patent and other rights reserved. |
