Item Details:
Telewave ANT450Y5-WR Yagi Antenna
The Telewave ANT450Y5-WR is a superior directional antenna, tailor-made for both point-to-point and point/multipoint setups. It delivers a 5 dBd forward gain and boasts an impressive front-to-back ratio. Constructed with solid aluminum elements featuring 360° welds, it avoids intermodulation while ensuring remarkable durability. The antenna is thoroughly shielded with our advanced Txylan™ coating, offering resistance to icing, corrosive gases, UV rays, salt spray, acid rain, and sand carried by wind. Its feed line is securely housed within the boom, and the radiating element is fully enclosed by a robust, RF-transparent radome to guard against ice and other potential hazards.
The ANT450Y5-WR comes equipped with a pre-welded vertical plate and a set of mast clamps. An additional horizontal plate is available as an option, or it can be paired with the
ANTM400H adapter. The clamp set is designed to accommodate any vertical mast or tower structure with an outer diameter ranging from 1.5” to 3.5”.
For mounting on angled structures, the Universal mount replaces the pre-welded clamp. This alternative provides three distinct axes of rotation, enabling nearly any desired angle of orientation. The "U" mount can be attached to almost any support up to 3.5” in diameter, and it's also adaptable for use on flat surfaces and utility poles.
Specifications:
Frequency (continuous): |
420-470 MHz |
Elements: |
3 |
Gain (typ): |
5 dBd |
Dimensions (L x H): |
24 x 14 in. |
Power rating (typ): |
500 watts |
Antenna weight: |
5 lb. |
Impedance / VSWR: |
50 ohms / 1.5:1 (max) |
Shipping weight: |
9 lb. |
Front to back ratio (min): |
18 dB |
Wind rating / with 0.5” ice: |
150 / 125 MPH |
Beamwidth V / H: |
64° / 116° |
Exposed area (flat plate equiv.): |
0.12 ft.² |
Pattern / Polarization: |
Directional / Vertical |
Lateral thrust at 100 MPH: |
4.8 lb (40 psf - flat plate equiv.) |
Termination: |
N Female or 7-16 DIN (opt) |