American Communication Systems
Home  >>  Eupen NF50V78N1
My Cart Cart    
My Account My Account


Eupen NF50V78N1

N Female Connector for 7/8" Standard Cable, O-Ring Type, 1 ea
The connector is designed according the standard interface as N. Contact components are silver or trimetal plated to minimize insertion loss and passive intermodulation products
Customer Rating:  
/
Vote!
Item SKU Number:  466752
Made in:  Belgium 
FCA point / Shipped from:  USA 
 Download Free Materials:
  
Adobe Acrobat Reader Eupen-78-connectors-for-RF-cables-data-sheet.pdf (226.06 KB)
  
Adobe Acrobat Reader Eupen-cable-connectors-installation-manual.pdf (2567.91 KB)
 Item Details:


Eupen 1-1/4 inch Coaxial Cable Connectors

The connectors are designed with the standard interfaces such as N, 4.3-10, or DIN 7-16. The contact components are coated with silver or trimetal to reduce the loss of signal and unwanted interference. The mechanical parts are covered with a layer of nickel to ensure durability and protection against corrosion. To guarantee resistance in harsh environmental conditions, silicone O-rings are used to make the connectors watertight. For a convenient and dependable installation that is also cost-effective, special trimming tools are highly recommended.

Available as:

4.3-10F50V78N1 4.3-10 female, 7/8" connector
4.3-10M50V78N1 4.3-10 male, 7/8" connector
7/16F50V78N1 7/16 DIN female, 7/8" connector
7/16M50V78N1 7/16 DIN male, 7/8" connector
NF50V78N1 N female, 7/8" connector
NM50V78N1 N male, 7/8" connector

Features:

- Low reflection coefficient (up to 3.0 GHz)
- Low PIM level
- High contact force through inner contacts made in a high-strength copper alloy
- Provides watertight seal, ensuring protection against moisture and dust (IP67/IP68)
- Resistant to corrosion, maintaining long-lasting functionality
- Quick trimming tool for cable preparation
- Fully compatible with copper & aluminium cable




Electrical characteristics:

Nominal impedance, Ohm: 50
Reflection coefficient @ 3 GHz, db: ≥35
Working voltage: 1 - 2.7 kV rms, 50 Hz (see pdf spec sheet)
Max peak power: 10 - 40 kW (see pdf spec sheet)
Temperature range: -40°F to +185°F (-40°C to +85°C)
External parts materials Brass with passivated silver or trimetal or electroless nickel plating
Outer contact: Brass with passivated silver or trimetal plating
Inner contact: Passivated silver plated high-strength copper alloy and brass
Dielectric: TXP / PTFE
O-Rings: High quality silicone
Special trimming tool: F-78


 Similar or Related Products:

 These models may be compatible with your equipment:

7/16F50V78N1
7/16F50V78N1
Eupen


7/16 DIN Female Connector for 7/8" Standard Cable, O-Ring Type, 1 ea
4.3-10F50V78N1
4.3-10F50V78N1
Eupen


4.3-10 Female Connector for 7/8" Standard Cable, O-Ring Type, 1 ea
EC5-50-A
EC5-50-A
Eupen


7/8" Low Loss Foam Coax Standard Cable
NM50V78N1
NM50V78N1
Eupen


N Male Connector for 7/8" Standard Cable, O-Ring Type, 1 ea
4.3-10M50V78N1
4.3-10M50V78N1
Eupen


4.3-10 Male Connector for 7/8" Standard Cable, O-Ring Type, 1 ea
7/16M50V78N1
7/16M50V78N1
Eupen


7/16 DIN Male Connector for 7/8" Standard Cable, O-Ring Type, 1 ea





 Last Viewed Items:

NF50V78N1 N Female Connector for 7/8" Standard Cable, O-Ring Type, 1 ea
07-110-3662 Cadex charger battery adapter. To be used with batteries made for Maxon GSX, SL3400 Series radios.
KWD-YH-3000U High Visibility Green Housing Kit (Standard Key Model Only)
PDE Option D RS-232 Port and Serial Printer Cable
MB-76 Belt Clip
OPC-2382 Programming Adapter Cable
EAK-1WDR-MT1 1-Wire Audio Surveillance Kit with Rotating Earpiece, Adjustable D-ring and PTT
F1721 43 ICOM IC-F1721 High End VHF Mobile Radio, 136 - 174 MHz, 50W, 256 Channels, LCD Display, 5 Programmable Keys, Detachable Front Panel
TPRD-0784 60-88 MHz 4-Cavity Bandpass/Reject Duplexer, 8 inch, N-Female Connector
L-1728 Retrofit Install of MPT Option



Share this Page