American Communication Systems
Home  >>  Eupen NM50VL14
My Cart Cart    
My Account My Account


Eupen NM50VL14

N Male Right Angle Connector for 1/4" Standard Cable, O-Ring Type, 1 ea
The connector is designed according the standard interface as N. Contact components are silver or trimetal plated to minimize insertion loss and passive intermodulation products
Customer Rating:  
/
Vote!
Item SKU Number:  466721
Made in:  Belgium 
FCA point / Shipped from:  USA 
 Download Free Materials:
  
Adobe Acrobat Reader Eupen-14-connectors-for-RF-cables-data-sheet.pdf (108.04 KB)
  
Adobe Acrobat Reader Eupen-14-connectors-installation-instructions.pdf (462.85 KB)
 Item Details:


Eupen 1/4 inch Coaxial Cable Connectors

The connectors are designed with the standard interface such as N. The contact components are coated with silver or trimetal to reduce the loss of signal and unwanted interference. The mechanical parts are covered with a layer of nickel to ensure durability and protection against corrosion. To guarantee resistance in harsh environmental conditions, silicone O-rings are used to make the connectors watertight. For a convenient and dependable installation that is also cost-effective, special trimming tools are highly recommended.

Available as:

NF50V14 N female, 1/4" connector
NM50V14 N male, 1/4" connector
NM50VL14 N male, right angle, 1/4" connector

Features:

- Low reflection coefficient (up to 2.5 GHz)
- Low PIM level
- High contact force through inner contacts made in a high-strength copper alloy
- Provides watertight seal, ensuring protection against moisture and dust (IP67/IP68)
- Resistant to corrosion, maintaining long-lasting functionality
- Quick trimming tool for cable preparation
- Fully compatible with copper & aluminium cable

Electrical characteristics:

Nominal impedance, Ohm: 50
Reflection coefficient @ 2.5 GHz, db: ≤ 0.03
Working voltage: 1 kV rms, 50 Hz
Max peak power: 10 kW
Temperature range: -40°F to +185°F (-40°C to +85°C)
External parts materials Brass with passivated silver or trimetal or electroless nickel plating
Outer contact: Brass with passivated silver or trimetal plating
Inner contact: Passivated silver plated high-strength copper alloy and brass
Dielectric: TXP / PTFE
O-Rings: High quality silicone
Special trimming tool: SPTC50A14


 Similar or Related Products:

 These models may be compatible with your equipment:

NF50V14
NF50V14
Eupen


N Female Connector for 1/4" Standard Cable, O-Ring Type, 1 ea
EC1-50
EC1-50
Eupen


1/4" Standard Foam Coax Cable
NM50V14
NM50V14
Eupen


N Male Connector for 1/4" Standard Cable, O-Ring Style, 1 ea





 Last Viewed Items:

NM50VL14 N Male Right Angle Connector for 1/4" Standard Cable, O-Ring Type, 1 ea
PB-360P-48 Smart Charger, 57.6 VDC @ 6.25 Amps Output, 30-60 Ah Battery Capacity
6272B Leather Carry Case with Belt Loop
V3-10493 HT750, HT1250 cord assembly with LED
ANT2045Y12-WRANR 1920-2170 MHz Aluminum 13-Element Yagi Antenna, 12.2 dBd, 500W, N-Female Connector
CP-12L 21 Cigarette Lighter Cable with Noise Reduction Filter
B2S3/Q5BF Antenna, Quarter Wave, 764 - 960 MHz, N-Female
2016B Leather Carry Case with Belt Loop
2342B-350 Nylon Carry Case with Swivel
07-311-2340 Cadex charger battery adapter. To be used with batteries made for Climet CI-450t Miscellaneous Equipment.



Share this Page