Item Details:
Eupen 1/2 inch Coaxial Cable Connectors
The connectors are designed with the standard interfaces such as N, 4.1/9.5, 4.3-10, or DIN 7-16. The contact components are coated with silver or trimetal to reduce the loss of signal and unwanted interference. The mechanical parts are covered with a layer of nickel to ensure durability and protection against corrosion. To guarantee resistance in harsh environmental conditions, silicone O-rings are used to make the connectors watertight. For a convenient and dependable installation that is also cost-effective, special trimming tools are highly recommended.
Available as:
4.1/9.5M50V12 |
4.1-9.5 male, 1/2" connector |
4.3-10F50V12N1 |
4.3-10 female, 1/2" connector |
4.3-10M50V12N1 |
4.3-10 male, 1/2" connector |
7/16F50V12N1 |
7/16 DIN female, 1/2" connector |
7/16M50V12N1 |
7/16 DIN male, 1/2" connector |
7/16M50VL12 |
7/16 DIN male, right angle, 1/2" connector |
NF50V12 |
N female, 1/2" connector |
NM50V12 |
N male, 1/2" connector |
NM50VL12 |
N male, right angle, 1/2" connector |
Features:
- Low reflection coefficient (up to 3.0 GHz)
- Low PIM level
- High contact force through inner contacts made in a high-strength copper alloy
- Provides watertight seal, ensuring protection against moisture and dust (IP67/IP68)
- Resistant to corrosion, maintaining long-lasting functionality
- Quick trimming tool for cable preparation
- Fully compatible with copper & aluminium cable
Electrical characteristics:
Nominal impedance, Ohm: |
50 |
Reflection coefficient @ 3 GHz, db: |
≥35 |
Working voltage: |
1 - 2.7 kV rms, 50 Hz (see pdf spec sheet) |
Max peak power: |
10 - 40 kW (see pdf spec sheet) |
Temperature range: |
-40°F to +185°F (-40°C to +85°C) |
External parts materials |
Brass with passivated silver or trimetal or electroless nickel plating |
Outer contact: |
Brass with passivated silver or trimetal plating |
Inner contact: |
Passivated silver plated high-strength copper alloy and brass |
Dielectric: |
TXP / PTFE |
O-Rings: |
High quality silicone |
Special trimming tool: |
SPTC50AV12 |