Eupen EC7-50-A-B
1 5/8" (Blue Jacket) Low Loss Foam Coax Cable
Item SKU Number: 466002
FCA point / Shipped from: USA
Item Details:
Eupen EC7-50-A Coaxial Cable
Coaxial cable, "A" series 1-5/8" 50 ohm corrugated copper, UV resistant, halogen free.
Available as:
Construction:
| Inner conductor: |
Corrugated copper tube, ⌀ 0.70 in (17.7 mm) |
| Dielectric: |
Microcell gas-injected PE, ⌀ 1.69 in (43 mm) |
| Outer conductor: |
Corrugated copper, ⌀ 1.83 in (46.6 mm) |
| Outer sheath: |
Black polyethylene, ⌀ 1.97 in (50.0 mm) |
Characteristics:
| Impedance (Ohm): |
50 ± 1 |
| Temperature range: |
-40°F to +140°F -40°C to +60°C |
| Water immersion testing: |
IP67 & IP68 |
| RF peak voltage (kV): |
5.5 |
| RF peak power (kW): |
302 |
| Cut-off-frequency (GHz): |
2.8 |
| Insulation resistance (MΩ/km): |
>> 5000 |
Similar or Related Products:
These models may be compatible with your equipment:
NM50V158N1
EupenN Male Connector for 1 5/8" Standard Cable, O-Ring Type, 1 ea
NF50V158N1
EupenN Female Connector for 1 5/8" Standard Cable, O-Ring Type, 1 ea
Last Viewed Items:
| EC7-50-A-B |
1 5/8" (Blue Jacket) Low Loss Foam Coax Cable |
| SS-12XTL |
Desktop Radio Housing with 13.8 Volt @ 12.0 Amp Switching Power Supply |
| 07-111-2780-00 |
Cadex charger battery adapter. To be used with model HR-4/5FAUP NiMH 9.6V 1950 mah battery, made for Sanyo HR-4/5FAUP |
| 07-110-5195 |
Cadex charger battery adapter. To be used with model LIP-201 Li 7.2V 1200 mah battery, made for Sony SONY CMD500, SONY CMD500, 600, SIEMENS S4 |
| W64434/ENCI-2 |
Notch Pass Duplexer / Iso-Plexer, 144 – 190 MHz, 50 W, 4PN DL |
| SS-10TK-7180 |
Desktop Radio Housing with 13.8 Volt @ 10.0 Amp Switching Power Supply |
Share this Page