Cadex Adapter 07-110-1581
Description:
Adapter 07-110-1581, compatible with
PF85, PFX85 radios, manufactured by Philips.
This adapter charges battery with or without
the radio.
Above adapter have been certified to correctly
operate with compatible
original battery and aftermarket batteries listed.
Pay attention to the chemistry of the battery
you have.
This adapter is compatible with the following
batteries:
Original manufacturer: Philips
AT14372 - NiCd, 9.6V@800mAh
AT14566 - NiCd, 9.6V@500mAh
AT14761 – NiCd, 9.6V@800mAh
AT14883 – NiCd, 9.9V@800mAh
Aftermarket batteries: N/A
Aftermarket batteries from other manufacturers
may also be compatible.
Contact us if you have questions.
Cadex Electronics Inc. is an established global leader in battery management products. Battery diagnostics and monitoring techniques are not advancing as rapidly as the global battery market demands. Much work lays ahead,
and many companies, including Cadex, are making critical advances in the field. These incremental improvements will help extend battery life without sacrificing reliability. This is consistent with protecting our environment by being able to fully utilize the life of each battery and reducing the number of packs discarded.
| 07-110-1581 | Cadex charger battery adapter. To be used with batteries made for Philips PF85, PFX85 radios. |
| ACC-916CD | PC Software (CD-ROM) includes instructions |
| ANTM020 | Galvanized Steel Mast, 252 inch Length |
| L-1001 | Configure Radio for Intrinsically Safe |
| V3-10532 | Replacement Cable for Speaker Microphones (Storm with Emergency Button), Coil Cord Assembly |
| 07-111-4120 | Cadex charger battery adapter. To be used with batteries made for Kenwood TK-3230 Radio(s). |
| CP200D-U-SLB | MOTOTRBO CP200d Analog ONLY UHF Portable Radio, 403-470 MHz, 4 Watt RF Power, 16 Channels, 12.5/25 kHz, No Display, Non Keypad Version (AAH01QDC9JC2AN) |
| L-888 | Install KCT-20 in 60G/62G Series Mobiles for KGP-1A, KGP-1B |
| SRERTM | RELM/BK 800 MHz Repeater, TX: 805-825 MHz RX: 850-870 MHz, 35 Watts, N-Type Female RF Output Antenna Connector, 12VDC Rackmount Power |
| AW STUD | AWedge™ Stud That Slips Over the Battery Clip Connection Point |
