Item Details:
Icom HM213 Speaker Microphone
Floats in water with the radio. Full sized waterproof speaker microphone including alligator type clip to attach to your shirt or collar, and so on. The HM-213 meets IP57 requirements for dust protection and waterproof protection.
Specifications:
Connector: |
1 pin, 4 poles |
Cable Length: |
16.3 in / 415 mm (when curled) |
Waterproof: |
IPX7 (1m depth for 30 minutes) |
Weight: |
4.48 oz / 127 g |
Note
• NEVER immerse the connector in water. If the connector becomes wet, BE SURE to dry it before attaching to the transceiver.
• The microphone element is located at the top of the speaker microphone. To maximize the readability of your transmitted audio, hold the microphone approximately 5 ~ 10 cm (2 ~ 4 inches) from your mouth, and then speak at your normal voice level.
Attaching the HM-213
1. Turn OFF the power.
2. Insert the speaker microphone connector into the [SP/MIC] connector and securely
screw it. Be careful not to cross-thread the connection.
KEEP the transceiver’s [SP/MIC] cap attached when the speaker microphone is not used. If the cover is not attached, water will get into the transceiver. Moreover, the terminals (pins) will become rusty, or the transceiver will function abnormally if the connector gets wet.
Compatible with ICOM two-way radios:
IC-M25
IC-M25 EVO
IC-M37