Item Details:
Maxon MDS Series Wireless Radio Speakers
MDS-1400/2400/3400 are wireless, programmable, receive-only radio speakers that can be used with any Analog or DMR Digital (DMR Tier2 TDMA) portable or mobile radio programmed in the UHF band (400-470 MHz) for remote broadcasting & announcements. System will allow a user with a portable radio within range to transmit audio from their radio to one speaker, a select number of speakers, or all speakers within a building/area.
The speaker system consists of the speaker and a Bluetooth USB module for your PC that is used to program the speaker. The MDS Series uses a plug-in power supply that converts the AC voltage to 12VDC
to power the speakers. MDS-1400/2400 versions can be either wall-mounted or stood on a book shelf. The MDS-3400 is a circular speaker that is hard mounted into a wall or ceiling.
Use wherever wireless broadcasting or announcement loudspeakers are needed but where it may be hard to install wiring for a PA system: Schools, Factories, Bus/Train Terminals, Shopping Centers, Large
Stores, Parking Lots, Golf Courses, Amusement Parks, Warehouse & Distribution Centers, and Public Address Alerting.
The plug and play design means there is no installation of pulling wires through walls thus reducing costs and saving time.
Main features:
· Works with any DMR Tier II Digital or Analog UHF radio in 400-470 MHz band
· Range 2+ miles (Depending on Tx radio power & antenna positioning)
· Unlimited # of Speakers & Portable Radios can be used together
· Single Channel (stores 512 Channels, 32 Channels per Zone)
· Programmable DMR / Analog / Mixed Mode Per Channel
· Private Call, Group Call (to use only specific loudspeakers), All Call (All Speakers) with DMR radios
· CTCSS/DCS can be used in Analog mode to access specific speakers
· Broadcast Radio Alerts from Portable Radios for Emergencies
· Program Speaker & Upgrade firmware using Bluetooth Dongle
· Rechargeable Backup Battery (5-Hr Broadcasting, 9-Hr Standby)
· Remote volume control using
MDP-6424 Portable Radio
· UHF "rubber duck" antenna supplied w/speaker set-up
· Each speaker comes with basic mounting brackets for wall or ceiling installation
Available in three versions:
MDS-1400 |
10W rectangle speaker, w/removable power supply |
MDS-2400 |
20W rectangle speaker, w/removable power supply |
MDS-3400 |
10W circle speaker, w/o power supply |
Specifications:
Audio Output: |
10W (MDS-1400/3400) 20W (MDS-2400) 8 Ohms |
Channel Spacing: |
12.5 kHz |
Power Supply: |
110V AC @ 12V DC / 1A (MDS-1400/2400) |
Dimensions (W x D x H): |
MDS-1400: 126 x 133 x 266 mm MDS-2400: 126 x 133 x 376 mm MDS-3400: ⌀227 x 100(D) mm
|
Operating Temperature: |
-22° F to +140° F -30° C to +60° C |
Basic Associated Accessories:
Below are some of the accessories that can be used with the Maxon (TecNet) MDS-1400 model.Click the Accessory Catalog Button for complete and updated information (cost, availability, and more).
ACC-MDSPC | Bluetooth Programming Dongle for MDS Speakers |
ACC-MDSSW | Windows Programming Software 12.5 kHz Only |
ACC-MDSPS | 110V AC @ 12V DC 1 Amp Power Supply for MDS-1400 or MDS-2400 |
PS-340012V | 110V AC Power Supply with Wall Plug for MDS-3400 |