Item Details:
Kenwood NEXEDGE™ NX-5600H Digital and FM Mobile Radio
RF Deck is NOT a complete radio - you must add accessories for full functionality.
The NX-5600HBF is a 110-watt mobile transceiver that supports NXDN digital protocol and FM analog for mixed operation. This high-power VHF Low Band RF deck – equipped with Bluetooth®, GPS and a memory card slot – requires one of several optional remote control heads, all of which offer an intuitive controls for easy operation. The versatile NX-5600HB can be combined with other RF decks and multiple remote control heads to create a radio system that is tailored to your specific needs, thanks to a wide selection of accessories.
Note that the NX-5600HB mobile series only supports NXDN 12.5 kHz Conventional digital CAI; P25, DMR,NXDN Trunked digital CAIs and NXDN 6.25 kHz channel spacing mode are not supported.
NX-5000HB high power RF decks:
The NX-5000 mobile series allows users to create a variety of configurations to suit different requirements by combining different options. Some of the standard configurations are:
Single Remote Control Head and
Single RF Deck
Dual Remote Control Head and
Single RF Deck
Dual Remote Control Head and
Multi RF Decks
Other combinations are available.
NX-5000H mobiles include:
- High power radio
- User guide
- 3 Years Premium Warranty
| Weight: |
12.1 lbs |
| Dimensions (inches): |
7.01 x 2.56 x 13.84 |
GENERAL FEATURES:
- 110 W to 25 W RF output power
- 1024 CH-GID / 128 Zones
- Multi-Digital Operation in NXDN/P25
- Built-in Micro USB A-B interface
- Horn Alert / Public Address
- Built-in GPS receiver
- Built-in Bluetooth module
- Built-in 56-bit DES encryption
- 256-bit AES encryption (Optional)
- 12 Watt audio output
- DB25 and Molex 9-pin accessory connector
- Active Noise Reduction (ANR)
- KPG-D1N Windows software
- Flash firmware upgrade
DIGITAL – NXDN® MODE:
- NXDN® Conventional
- AMBE+2™ VOCODER
- 6.25 and 12.5 kHz channels
- Over-the-Air Alias
- Over-the-Air programming (requires KPG-180AP OTAP Manager software)
- Paging Call
- Emergency Call
- All Group Call
- Status Messaging
- Remote Stun / Kill / Check
- Short & Long Data Messages
- GPS Location
- NXDN® Scrambler
ANALOG MODE:
- Conventional Zones
- FleetSync®/II: PTT ID ANI, Caller ID Display, Selective/Group Call, Emergency Status, Text Messages
- MDC-1200: PTT ID ANI, Caller ID Display, Emergency, Radio Check & Inhibit
- QT / DQT
- Two-Tone (Conventional Zones only)
- DTMF
- Built-in Voice Inversion Scrambler
- Noise Blanker
Basic Associated Accessories:
Below are some of the accessories that can be used with the Kenwood NX-5600HBF3 model.
Click the Accessory Catalog Button for complete and updated information (cost, availability, and more).
| KCT-73MIC | External Microphone Kit with 9.8 ft. Cord for Safer Driving |
| KMC-35 | Standard Electret Mobile Microphone, 8-pin Connector |
| KMC-36 | Standard Electret Mobile Microphone with 12-key DTMF, MIL-SPEC, 8-pin Connector |
| KMC-65M | Mobile Microphone without DTMF Keypad |
| KMC-66M | Mobile Microphone with DTMF Keypad |
| KMC-59C | Control Station Desktop Microphone |
| KMC-9C | Control Station Desktop Microphone |
| KES-5 | 40 Watt External Mobile Speaker, 4 Ohms, Black |
| KCT-71A100 | Extended Control Head Cable (up to 100 ft. max.) |
| KCT-71A50 | Extended Control Head Cable (up to 50 ft. max.) |
| KCT-71M2 | Remote Control Cable (17 feet) |
| KCT-71M3 | Remote Control Cable (25 feet) |
| KCT-71M4 | Remote Control Cable (1.6 feet) |
| KCT-77M2 | Remote Control Cable (17 feet) |
| KRK-14HM | Control Head Interface Kit for KCH-19M |
| KCT-18 | Ignition Sense Cable |
| KCT-23M2 | DC Cable (75/110W Dash mount) |
| KCT-23M4 | DC Cable (75/110W Remote mount) |
| KLF-2 | 12V DC Line Filter |
| KPG-AE1K | AES/DES Encryption Software Key Loader for KWD-AE31K |
| KPG-DE1K | DES Encryption Software Key Loader for KWD-AE31K |
| KWD-AE30K | AES FIPS140-2 & DES Encryption Module (Multi-Key) |
| KWD-AE31K | AES & DES Encryption Module (Multi-Key) |
| KCT-90USB | USB Mobile Cable |
| KPG-115 | Key Loader Interface Cable for Motorola KVL-3000 / 3000 Plus |
| KPG-115AUT | KVL-4000 Radio Authentication Cable |
| KPG-46XM | Full Speed USB Programming Interface Cable |
| KPG-CLN-RJ45 | Mobile-to-Mobile Cloning Cable (RJ45 - RJ45), 3m |
| 6ABBMIG | Single Deck Dual Head Remote Mount |
| 6ABMIG | Single Head Remote Mount Kit |
| 6AFFMIG | Single Deck Dual Head Remote Mount |
| 6AFMIG | Single Head Remote Mount Kit |
| 6AHMIG | Single Head Remote Mount Kit |
| KCH-19M | Basic Control Panel |
| KCH-20RM | Full Featured Remote Control Panel. Includes mounting bracket |
| KCH-21RM | Handheld Control Head for Long Cable |
| KCH-21RM-S | Hand Held Control Head with Short Cable |
| KCT-72M | External Accessory Connection Cable |
| KCT-91MRS | DB25 Cable for Mobile Relay Station |
| KMB-36 | Mounting Bracket |
| KRA-40GM | Magnetic Mount GPS Active Antenna |
KENWOOD NEXEDGE NX-5000
Manufacturer's Catalogs and Guides:
These files contain information about the available products from the manufacturer. If you need something that is not on our website, please
contact us. We will help you purchase the desired product at a low price.
JVCKENWOOD Corp. manufactures analog and digital two-way radios, including P25 compliant and NEXEDGE radios that use the NXDN protocol. Kenwood provides complete turnkey system solutions for the utility, public safety, government, education, healthcare, and business and industrial markets.
KENWOOD land mobile portables, mobiles and custom systems are acknowledged to be a top choice in the world market, particularly by first responders, and are a trusted supplier to business and industry.
KENWOOD is deploying digital radio communications systems with high reliability and functionality, which were developed by leveraging its long-standing technologies and know-how in communications and audio around the world. Professional two-way radio solution is designed to meet the highest demand of today's communications environment and to provide users with innovative features to transform their operation.
