GENERAL
FEATURES:
50W VHF & 45W UHF
DSP Processing
Wide Frequency Range
Wide/Narrow Channel Spacing
Programmable Power Per Channel
Remote Mount Capable (KRK-9)
3.5 W Front Panel Speaker
12 W External Speaker Output
Companded Audio Per Channel
12-Character Alphanumeric Display
3-Digit Numeric Sub-Display
Dot Matrix Backlit LCD
TX/Busy LED Indicators
LCD Backlight Control
6 PF Keys with Label Inserts
Volume Knob / Power ON/Off Button
Zone/ CH Selector Knob
Dynamic Channel/Zone Allocation
Home CH/GID
5 CH. Direct Channel Select (User)
CH/GID Selector Tracking & Recall
Send GPS
Speaker Internal-External Switch
Squelch Level
FleetSync & FleetSync II ***
Encryption/Scrambler Board Support
ANI Board Support
Dual ANI & Scrambler Board Install
Emergency Call (DTMF& FleetSync)
DTMF Decode Selective Call
DTMF Deadbeat Disable
DTMF PTT ID & DTMF Emergency ID
Auto-Dial Memory (32 numbers)
Horn Alert (Programmable Output)
Public Address
DB-25 Accessory Connector
AUX A Output (High or Open Coll.)
AUX B Output (High or Open Coll.)
AUX Inputs 1-4 (F-Port)
AUX Outputs 1-4 (F-Port)
16 CH. Remote Ctrl. I/Os (F-Port)
Data Port I/Os (F-Port)
FleetSync COM 1 & 2 (DB-25)
6-Pin Accessory Connector |
Ignition
Sense On/Off
Timed Power Off with Ignition Sense
Inhibit PTT ID in TA
PTT Release Tone
Minimum Volume
Control Tones/Offset Volume
Power On Text
Embedded Message (64 Char.)
Embedded Message w/Password
Data Password (Anti-piracy)
Radio Password (Radio Lock)
Clone Capability (enable/disable)
PC Programming & Tuning
Flash ROM Firmware
Windows Programming Software
KES-5 External Speaker
MIL-Spec/Noise-Cancel Mic Options
KDS-100 Compatible (KCT-40)
KGP-2A/2B Compatible (KCT-40)
MIL-STD 810 C, D, E & F
---------------------------------
INCLUDED ITEMS
KMC-27B Standard Microphone
DC Cable
Mounting Bracket
Instruction Manual
2 Year Warranty Card
CONVENTIONAL ZONE OPERATION
128 Zones (max.)
Dual Priority Scan
Single/Multi-Zone & List Scan
Scan Revert Channel Display
Scan Delete/Add
Nuisance Delete
QT/DQT Encode & Decode
Operator Selectable Tone (16 OST)
2-Tone Decode (4 x 4 Decoding)
Tones: A, B, C, D; Seq.:A-B, A-C, C-B, A-D, C-D
4 Decode Groups x 4 Decode pairs
8 Unique Alert Tone Patterns
2-Tone Encode (32 Selectable Pairs)
BCL/BCL Override, TOT & TA
LTR ZONE OPERATION
32 Zones (max.)
250 GIDs max. |
LTR Talk
Around
Scan Revert Group Display
System Scan & Group Scan
Auto System Search
FLEETSYNC / FLEETSYNC II ***
Programmable for either FleetSync I or FleetSync II protocols
PTT ID (Digital ANI)
Caller ID Display (per CH;, 100 ID List)
Status Messaging (50 Msg. List capacity)
70 Custom Dispatch Messages
9 Reserved Special Use Messages
ST# 98 - Man Down Emergergency (portables)
ST# 99- Emergency Status
ST# 88- Emergency Mode Off
ST# 89- Horn Alert Request
ST# 90- Stun radio (No TX)
ST# 91- Stun radio (No TX / No RX audio)
ST# 92- Turn off Stun
ST# 93- ACK stun is ON
ST# 94- ACK stun is OFF
ST# 80-87, 95-97 (reserved for future use)
Selective Call (100 ID List, Last 3 Message Stack)
Short Text Messages** (stored/display)
Long Text Message** (req. KDS-100, KCT-40//36)
PC Serial Control Interface** (req. computer serial cable)
FS GPS Data** (req. aftermarket GPS/modification)
** Fleetsync
Enhanced features (factory enabled)
*** FleetSync II air protocol is not compatible with the
original FleetSync air protocol. The TK-7150/8150 FleetSync PC Serial
interface
is the same regardless of FleetSync or FleetSync II operation with dispatch
software applications.
|