 |
|
|
|
|
|
|
|
| Send me updates on new products |
| Your e-mail: |
|
|
|
|
|
|
|
912 rapid deployment, single-wire, end fed portable broadband antenna (2 - 30MHz) - 40 Watt PEP max
Includes: lanyard, spool, earth peg, 5 metres of RG-58 coax. cable, with waterproof BNC coaxial connectors, carry bag
| FCA point / Shipped from: Australia |
|
|
|
- Antenna accessories (5)
- Manuals (3)
- Portable radios HF (1)
- Portable military radios (2)
- Mobile radios HF (11)
- Base radios HF (10)
- Base military radios (1)
- Receivers HF (1)
- Transmitters HF (5)
- Telephone interconnects (1)
- Antennas VHF base (1)
- Antennas UHF base (1)
- Modems (3)
Go Top
912 series of broadband base station antennas
912 series of broadband base station antennas
The Barrett 912 series of broadband base station antennas are
designed for use in either an inverted "V" configuration, using a
single mast, or a standard dipole configuration, between two masts.
In the inverted "V" configuration the 912 provides a more omni
directional radiation pattern. All broadband antennas in the series
are designed to provide optimum performance over a wide HF spectrum,
without the need for antenna tuners.
Using high quality stainless steel and glass reinforced composites the
912 series of broadband antennas are light weight and corrosion
resistant, but are able to withstand wind speeds in excess of 200km/h.
The antennas are supplied complete with an inverted "v" mounting
harness, 30 metres of coaxial cable and high quality waterproof
connectors.
General specifications
Frequency range 2 to 30 MHz
VSWR Less than 2.5:1
Impedance 50 ohm
Max Wind speed 207 km/h
BC91200 125 watt multi wire broadband dipole
Length insulator to insulator 28 metres
Width 1.3 metres
Power handling 125W CW, 250W PEP
Packed weight 6 kg
Packed dimensions 1.4m x 150mm x 100mm
BC91202 500 watt multi wire broadband dipole
Length insulator to insulator 28 metres
Width 1.3 metres
Power handling 500W CW, 1250W PEP
Packed weight 13kg
Packed dimensions 1.4m x 300mm x 150mm
BC91203 1000 watt multi wire broadband dipole
Length insulator to insulator 28 metres
Width 1.3 metres
Power handling 1000W CW, 2500W PEP
Packed weight 20kg
Packed dimensions 1.4m x 300mm x 150mm
BC91201 125 watt single wire broadband dipole
Length insulator to insulator 48 metres
Width n/a
Power handling 125W CW, 250W PEP
Packed weight 2kg
Packed dimensions 250mm x 300mm x 75mm
|
Go Top
|
|
|
|
| · |
BC91205
912 rapid deployment, single-wire, end fed ...
|
|
|
|
Send this page to your friends
